User Manual

Radio Text
You can display the radio text.
1
Displays the Radio Text.
2
Scrolls the Radio Text.
It is displayed when information cannot be
displayed on a single screen page.
3
Returns to the Tuner Menu.
Radio-Text
Display the Radio Text
2
MENU
Call the Tuner Menu
1
Search for Program Type
A program is tuned when you set its program
type.
1
Selects a program type.
2
Scrolls the program type list.
3
Searches for the program type.
It is displayed when the Program Type is selected.
4
Continue to touch more than 2 seconds, the
currently receiving station is registered to have
the selected program type.
5
Returns to the Tuner Menu.
etc.
SRCH
Search for the program type
4
News
Select a program type
3
PTY Search
Call the PTY Search Menu
2
MENU
Call the Tuner Menu
1
English 31
Tuner Control
Direct Search
Tunes in a station when its frequency is
entered.
—
When you enter them, signal reception starts.
Example: When you receive FM 92.1 MHz
Example: When you receive AM 810 kHz
The operation ends automatically if you do not
operate within 10 seconds.
Enter a frequency
3
DIRECT
Selects the Direct Search mode
2
Select a band
1
Traffic Information
When a traffic bulletin starts, any source is
switched to the traffic information and it is
displayed automatically.
When the traffic bulletin starts...
The Traffic Information screen appears automatically.
Traffic Information screen
1
Control the volume.
2
Calls the Sound Effects Menu. (see page 86)
3
Switches the source.
4
Calls the Setup Menu. (see page 59)
5
Turns the Traffic Information function on or off.
Preset of traffic information volume
Continue to touch the key until the volume is
displayed.
The preset volume is used automatically when the
traffic bulletin starts in the next time.
TI
Preset the volume
3
Adjust the volume
2
Tune in a station
1
English
30 English
SRC
2
3
4
5
1
1
1
1
2
2
3
1
SRCH
USER
RTN
1
None
Preset 3
98.1 MHz
AUTO1
2
2
3
5
4
1