Instruction manual Model SC300 Model SC400
IMPORTANT INFORMATION PLEASE READ THESE INSTRUCTIONS CAREFULLY Before using the appliance read the instructions carefully. The appliance is equipped with a thermostat that limits temperature, a thermofuse and a safety cap. It has been made in compliance with Australian Standards. Always connect the appliance to an earthed socket. Never leave the appliance unattended when still connected to the power supply source. Never turn the appliance over when using steam.
Model SC300 DESCRIPTION OF THE APPLIANCE L A B C D E F G H I L Floorcloth Main part of the appliance On/Off switch Safety Filling Cap On/Off pilot light Power cable Telescopic tube 165ml measuring cup Funnel Preheating/cool down stand
INSTRUCTIONS FOR USE MODEL SC300 Using KENWOOD STEAM MOP is really very simple: 1. After having taken the appliance out of its box, screw the telescopic tube onto the main part of the appliance (Fig.1). Then turn the two ends and pull them out to the desired length. Lock the upper part by turning clockwise (Figs 1a-1b). 2. Secure the cable onto the hook at the top of the tube (Fig.2). 3.
Model SC400 DESCRIPTION OF THE APPLIANCE H I L F D E C B G A B C D E F G H I L M A M Fig. 1 Fig. 2 Fig. 3 Fig. 5 Fig. 6 Fig. 4 Fig.
INSTRUCTIONS FOR USE MODEL SC400 Using KENWOOD STEAM MOP is really very simple: 1. Once the appliance has been unpacked, fit the extension tube in the appliance’s body and then extend it to the desired length (fig. 1). 2. Fix the top part of the tube by turning it in a clockwise direction (fig. 2). 3. Fix the cord into the hook which is provided along the tube (fig. 3) 4.
cod. 5085101900 rev. 0 del 20/05/02 LIMITED New Lane. Havant. Hants. P09 2NH HAGEMEYER AUSTRALASIA B.V. 104 Vanessa street Kingsgrove NSW 2208 Ph: (02) 93.70.88.
