User Manual

13
KEY FUNCTIONS
LOCK KEY
The default function of the Lock key is Super Lock.
Super Lock is designed to prevent accidental function
changes on your transceiver, during operation.
Press and hold the Lock key for 4 seconds to lock the
transceiver keys. The PTT switch and the Power switch/
Volume control can still be operated when Super Lock is
active.
To deactivate Super Lock, with the transceiver power OFF,
press and hold the PTT switch, the Lock key, and the Scan
key for 2 seconds while turning the transceiver power ON.
SCAN KEY
The default function of the Scan key is Scan + Temporary
Delete.
You can scan the channels of the transceiver to search for a
signal. When the transceiver verifies a signal on a channel, it
proceeds to check whether or not its QT/ DQT setting
matches that which is set up on your transceiver (if any). If
the QT/ DQT matches, the transceiver stops at the channel
and opens the squelch so you can listen to the call. If the QT/
DQT does not match, the call is ignored and scanning
continues.
Note: You can only use Scan if there are at least 2 channels
available on your transceiver that are not locked out of Scan.