User Manual

21
QUIET TALK (QT)/ DIGITAL QUIET TALK (DQT) SETTINGS
To change the QT/ DQT settings of a channel:
2
4
1
1
3
1
With the transceiver power OFF, press
and hold the PTT switch and Lock key
while turning the transceiver power ON.
Continue to hold the PTT switch and Lock
key until the LED flashes orange one time
and the transceiver announces “Self”.
Press the Lock key or Scan key to
select QT or DQT setup.
The transceiver announces “QT” or
“DQT”, depending on your selection.
Press and release the PTT switch, then
rotate the Channel selector to your
desired channel.
Upon releasing the PTT switch, the
transceiver announces “QT One” or
“DQT One”, depending on your selection.
Release the PTT switch and Lock key.
The transceiver announces “Channel”.
Pressing the Lock key or Scan key will toggle between QT,
DQT, and Channel setup.