User Manual

28
CALLING ALERT
Calling alert tones are used to identify yourself to your party
members and inform them that you are about to make a call.
Your dealer can set up your transceiver with 1 of several
different calling alert tones. If each party member uses a
different calling alert tone, it is easy to know who is making
the call
To make a call using the calling alert tone, press and hold the
PTT switch, then press the key programmed as Calling Alert.
• The calling alert tone will transmit for the duration you press the
Calling Alert key.
KEY LOCK
Press and hold the key programmed as Key Lock for
1 second to lock/ unlock the transceiver keys. The following
keys/ functions can still be used when Key Lock is active:
Autodial, Calling Alert, Key Lock, Monitor, Monitor Momentary,
PTT, Squelch Off, Squelch Off Momentary, and Volume.
When the transceiver power is turned OFF and then ON
again, the Key Lock function will be cancelled.
SUPER LOCK
Press and hold the key programmed as Super Lock for
4 seconds to lock the transceiver keys. The PTT switch and
the Power switch/ Volume control can still be operated when
Super Lock is active.
To deactivate Super Lock, with the transceiver power OFF,
press and hold the PTT switch, the Lock key, and the Scan
key for 2 seconds while turning the transceiver power ON.