5.8-Inch WIDE TELEVISION WITH CD PLAYER VZ907 INSTRUCTION MANUAL BEFORE USING • PAL type video products require receiving area settings to be entered before TV broadcasts are received. Look on page 11 for instructions on setting up the receiving area. Your television will not be able to receive TV broadcasts properly unless these settings are entered correctly. NTSC type video products do not require receiving area settings. • Set the “PAL-NTSC” switch on your video CD decoder as follows. (See page 36.
Contents English Before Use Safety Precautions ...............................................................................3 Handling Compact Discs ......................................................................5 Visual Function Monitor Open/Close.............................................................................6 Power Off ............................................................................................6 Switching Monitor’s Picture............................................
Safety Precautions Tape Player Control Function Direct Program Search System (DPSS) .............................................28 Tape player operations with the control screens Playing Cassette Tapes ......................................................................28 Direct Program Search System (DPSS) .............................................29 Fast Forwarding and Rewinding Cassette Tapes...............................29 Dolby B Noise Reduction ..................................................
Safety Precautions English • You cannot view video pictures while the vehicle is moving. To enjoy video pictures, find a safe place to park and engage the parking brake. NOTE • If you experience problems during installation, consult your Kenwood dealer. • If the unit does not seem to be working right, try pressing the reset button first. If that does not solve the problem, consult your Kenwood dealer. MODE V.SEL FNC ASPECT OPEN PWR SCRN V.
Handling Compact Discs Cleaning CDs Removing the CD If a CD has become dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the centre of the disc and moving outward. Do not clean CDs with conventional record cleaners, anti-static formulas, or chemicals such as paint thinner or benzene. Only remove the CD from the machine in a horizontal direction. You may damage the surface of the CD if you try pulling it down as it ejects.
Visual Function Monitor Open/Close English Adjusting the Left/Right Angle: Grasp both the sides of the monitor and set it to an easily visible angle. AM OPEN PWR TV/ VD DISC FM SOURCE OFF OPEN Closing the Monitor: Set the left/right angle to the center then lower the monitor so that it is completely flat. The monitor is then drawn in automatically after 2 seconds. Opening the Monitor: 1 Set the vehicle’s parking brake. 2 Press the OPEN button. The monitor opens.
V.SEL MODE V.SEL SCRN FNC BRIGHT English MODE TINT MONITOR SLIDE SCRN FNC COLOR Switching Monitor’s Picture The monitor’s picture switches as shown below each time the V.SEL button is pressed. 3 Television or Video 1 or Video 2 3 Navigation 3 Video 2 DIMMER SS CC RR EE EE NN CC OO NN TTRR OO LL OK Displaying Screen Control Screen CAUTION You cannot view video pictures while the vehicle is moving. To enjoy video pictures, find a safe place to park and engage the parking brake.
Visual Function English Switching Picture Mode ( for TV and video picture) The picture mode switches between normal, full, just and zoom each time the MODE button is pressed. yyy ;;; ;;; yyy ;;; yyy yyy ;;; • Normal mode • Full mode ;;; yyy ;;; ;;; ;;; yyy • Just mode • Zoom mode Switching Menu Screen When using for the first time, the menu screen appears when the FNC button is pressed. Switching Set Up Screen: Touch the [ SET UP ] to switch the set up screen. < see p.
Audio Control Function (with A907) Adjusting Audio BALANCE / FADER English Adjust various parameters of sound quality. FRONT Switching Audio Control Screen: Touch the [ AUDIO ] on the menu screen to switch the audio control screen.
System Set Up Function English Setting System Switching System Setting Screen: Touch the [ SET UP ] on the menu screen to switch the system setting screen. SYSTEM Setting AV Output Visual: Touch the [ AV-OUT ], the video of the AV output terminal will be switched as follows.
NOTE When the A907 is connected this function is not displayed. FM Transmitter Frequency Switching: When the FM transmitter function is turned on, you can switch the transmission frequency as follows Touch the [ < ] to Touch the [ > ] to F M -T X decrease the increase the 87.5 M H z frequency by one frequency by one step. step. NOTE • Be sure to select a frequency that is not the same as a broadcast station in your area.
System Set Up Function English Adjusting Time You can adjust the time manually. Also, with the automatic time adjustment function set at ON, you can set the clock time automatically according to time data sent from RDS stations (after receiving RDS signals for several minutes). The factory default is manual time adjustment. Switching Time Adjustment Screen: Touch the [ CLOCK ] on the system setting screen to switch the time adjustment screen.
Basic Source Control Function Basic operations with the buttons Basic operations with the source control screens T.I. LIST 1 V.SEL FM SCRN FNC ASPECT AM AV OUTPUT SELECT V–CD MPX FM 1 P 6 9 8 . 2 MHz FM 2 V.OFF 12 : 00 3 FM 1 P 6 AM 9 8 . 2 MHz 12 : 00 PTY English T.I.
TV Function English TV operations with the buttons MODE V.SEL FNC ASPECT TV operations with the control screens AM OPEN LIST 1 V–CD MPX TV/ VD DISC TV 1 P 1 3 FM SOURCE VD TV 2 PWR ❏ Source Control Screen(B) T.I. SCRN V.OFF AV OUTPUT SELECT ch 2 12 : 00 OFF FM 4 ¢ 4 SEEK 5 AME 6 Selecting Bands and Video Inputs Press the FM select the TV band. Each time you press the FM button, the TV bands switches between the TV1,TV2,Video1 and Video2.
Selecting Bands ▼ AUTO 1 (Auto Seek Tuning) ▼ AUTO 2 (Preset Station Seek Tuning) ▼ MANUAL (Manual Tuning) Tuning • Auto Seek Tuning (AUTO1) Touch the [ ¢ ] to seek increasing channels. Touch the [ 4 ] to seek decreasing channels. • Preset Station Seek Tuning (AUTO2) Touch the [ ¢ ] to move to the next preset station (i.e., the one with the next highest number), and the [ 4 ] to move to the last preset station (i.e., the one with the next lowest number).
TV Function English TV List Screen Selecting Channel on the TV Picture Screen Switching TV List Screen: Touch the [ LIST ] on the source control screen(B) to switch the TV list screen. If the lower center of the screen is touched while a TV/video picture is displayed, the audio source, picture settings, video out settings, etc., are superimposed on the picture (On Screen Display). The display turns off when the lower center of the screen is pressed again.
TUNER Control Function Tuner operations with the buttons V.SEL FNC PWR LIST 1 V–CD MPX FM 2 AM OPEN ❏ Source Control Screen(B) T.I. SCRN V.OFF AV OUTPUT SELECT TV/ VD DISC 3 FM 9 8 . 2 MHz FM 1 P 6 SOURCE AM 12 : 00 English MODE ASPECT Tuner operations with the control screens PTY OFF AM FM 4 ¢ 4 FNC 5 AME 6 Selecting Bands Press either the FM or AM button to select the band. Each time you press the FM button, the band switches between the FM1, FM2 and FM3.
TUNER Control Function English Selecting Bands Touch either the FM or AM button to select the band. Each time you touch the FM button, the band switches between the FM1, FM2 and FM3. Touch the AM button to select the AM band. Tuning • Auto Seek Tuning (AUTO1) Touch the [ ¢ ] to seek increasing frequencies. Touch the [ 4 ] to seek decreasing frequencies. • Preset station Seek Tuning (AUTO2) Touch the [ ¢ ] to move to the next preset station (i.e.
Tuner List Screen Switching Function Control Screen: Touch the [ FNC ] on the source control screen (B) to swicth the function control screen. Selecting Tuning Mode: You can choose from three tuning modes: auto seek, preset station seek, and manual. The “AUTO1” indicator is displayed when auto seek tuning is selected, and the “AUTO2” indicator is displayed when preset station seek tuning is selected. Each time you touch the [ SEEK ], the mode switches as follows.
RDS Function English RDS (Radio Data System) SYSTEM RDS is a digital information system that lets you receive signals besides those of regular radio programmes, such as network information being transmitted from radio stations. When listening to an RDS station (ie, a station with RDS capability), the programme service name of the station is displayed along with the frequency, advising you quickly which station is being received.
AF (Alternative Frequency) Function When poor reception is experienced, automatically switch to another frequency broadcasting the same programme in the same RDS network with better reception. The AF indicator is displayed when the AF function is turned on. Turning AF Function On/Off: Touch the [ AF ] to switch the AF function on " ON " and off " OFF ".
RDS Function English Presetting Volume for Traffic Information/News Programme Type (PTY) Function Preset the volume level to be used when traffic information starts to be broadcast. Conduct auto seek tuning only on those stations with selected kinds of programmes. 1 Touch the [ FNC ] on the control screen (B) to switch the function control screen. FM TI VOL ADJ FM 1 P 6 2 Tune into the station for which you want to set the volume.
S S S M M M M M S English Phone In Travel & Touring Leisure & Hobby Jazz Music Country Music National Music Oldies Music Folk Music Documentary All Music All Speech (S: Speech, M: Music) 2 Touch [ q ] - [ t ] to select the type of programme. Select the Type of Seeking the Selected Programme Type: Touch the [ 4 ] or [ ¢ ] to make a seek of frequencies with your selected type of programme. If your selected type of programme is found, the name of the station is displayed and the station is tuned into.
CD Control Function Fast Forwarding and Reversing Disc Play English CD operations with the buttons MODE V.SEL FNC ASPECT V.OFF AV OUTPUT SELECT V–CD MPX AM OPEN PWR Fast Forwarding Disc Play: Hold down on the ¢ button. Release your finger to play the disc at that point. Reversing Disc Play: Hold down on the 4 button. Release your finger to play the disc at the point.
CD operations with the control screens Pausing and Restarting CD Play NAME Track Search Search forwards or backwards through the tracks on the disc until you reach the one that you want to listen to. REP TRACK 1 5 P TRACK BEST H I TS 2 :55 12 : 00 SCN RDM Track number 1 0 P TRACK BEST H I TS DNPS DISC-IN Track time 2 :55 REP REP/SCN /RDM indicator DISC IN indicator 12 : 00 English Touch the [ 38 ] to make the disc pause. Touch the [ 38 ] again to start play again. T.I.
CD Control Function English Track Repeat Function Repeat playing the current track. Turning Repeat Play Function On/Off: Touch the [ REP ] to switch the repeat play function on and off. The REP indicator is displayed when the repeat play function is turned on. NOTE The repeat play function is cancelled when you stop playing the disc. Track Scan Function Successively play the beginning of each track on a disc until you find the track that you want to listen to.
Display Select Screen Switching Display Select Screen: Touch this area on the source control screen to switch the selecting display screen. 1 0 P TRACK BEST H I TS DNPS DISC-IN 2 :55 Selecting Name or Title Display for Discs: Each time you touch the [ Title ], the display during disc play switches as follows. ▼ Disc name (DNPS) ▼ English Switch the display that appears whilst discs are playing.
Tape Player Control Function English Tape player operations with the buttons Tape player operations with the control screens T.I. MODE V.SEL FNC ASPECT SCRN V.OFF AV OUTPUT SELECT V–CD MPX Dolby NR OPEN PWR AM TV/ VD DISC FM PLAY PLAY 17 :36 12 : 00 B.S SOURCE OFF 4 ¢ REP METAL SCN Direct Program Search System (DPSS) Skipping to Beginning of Current Track or to Previous Tracks (Rewind DPSS): Press the 4 button.
Direct Program Search System (DPSS) Skipping to Beginning of Current Track or to Previous Tracks (Rewind DPSS): Touch the [ 4 ]. Touch once to rewind to the beginning of the current track, twice to rewind to the beginning of the previous track, and so forth. You can skip up to nine tracks. Playback is continued after the tape is rewound by the indicated number of tracks. Skipping to Later Tracks (Fast Forward DPSS): Touch the [ ¢ ].
Tape Player Control Function Name Preset Function English Music Repeat NAME SET Repeatedly plays the track currently being listened to. BEST- H Turning Music Repeat On/Off: Touch the [ REP ] to switch music repeat on/off. Cancelling Music Repeat: Touch either the [ REP ] or [ 2 3 ]. NOTE Music repeat "knows" where a track begins by detecting the blank space preceding it (the space between tracks).
DSP Control Function Sound Field Control (SFC) Screen DSP Control Screen Step3 High C B A SFC CLUB DISCO SFC LEVEL HIGH Step2 Mid MID Step1 Low LOW English DBB OFF C LU B D IS C O D AN C E F R O N T R IG H T 1 2 3 Selecting Preset Equalizer Mode: Each time touch the area A to switch the equalizer mode. Selecting Preset Sound Field Control Modes: Each time touch the area B to switch the SFC mode.
DSP Control Function English Position Control Screen POSITION SELECT Equalizer Control Screen ROOM SIZE FrontR Large FrontL Mid EQUALIZER COMP Step3 Step2 DANCE Front Step1 Small OFF Rear All POSI CONTROL OK Position Select: Touch the [ FrontR ], [ FrontL ],[ Front ],[ Rear ]and [ All ],the listening position will be switched in the following order. [ FrontR ] : Centered on the front right seat. [ FrontL ] : Centered on the front left seat. [ Front ] : Centered on the front seat.
Remote Control Function Visual Function • SRC button Each time you press the SRC button, the source mode switches as follows: • V.SEL button Each time the V.SEL button is pressed, the image video will switch between the navigation and video. • MODE button Each time the MODE button is pressed, the screen mode switches between the normal, full, just, and zoom. • FNC button Press the FNC button to switch the source control screen.
English Remote Control Function TV Function Tuner Control Function • 38 button Each time you press the 38 button, the tuning mode switches to auto 1, to auto 2 and manual. • TUNE buttons Press the 4 button to make decreasing seeks (using the preset tuning mode). Press the ¢ button to make increasing seeks (using the preset tuning mode). • FM+ button Switch between theTV1,TV2,video1 and video2.
Installation Accessories CAUTION External view ......... Number of items q !3 t y .........1 .........4 !5 + !7 !8 SP FNC REAR AV AME AM – V.SEL ATT MODE SRC 38 TUNE ¢ TRACK 4 !6 DSIC .........2 + .........1 .........2 + r .........1 !4 TV/VD FM e .........1 .........1 – w .........1 .........1 i o !0 !1 !2 .........8 .........4 .........4 .........4 .........1 !9 @0 @1 @2 @3 1.
Installation Connection Antenna Unit (Accessory!7) English ■ Connection for VZ907 Main Unit Hideaway Unit AV OUTPUT MODE V.SEL TV ANTENNA INPUT SCRN FNC AV INPUT 1 L (MONO) VIDEO VIDEO R L AV INPUT 2 R VIDEO L R POWER Front side AM OPEN FM SOURCE Relay cable(Accessorye) TO MONITOR UNIT NAV.
Hideaway Unit Rear side English ■ Connection to Other Units NAV.IF TO MONITOR UNIT S M TO MZ-BUS X707 CAUTION Relay cable (Provided X707) M-S switch setting • Set to “S” when the A907 is connected. • Otherwise set to “M”. (The switch is set to “S” upon shipment from the factory.
Installation English Installation ■ Installation for Main Unit ■ Installation for Hideaway Unit and Video CD Decoder Unit Firewall or metal support ● Securing to audio board Metal mounting strap (Accessory!3) 1 Attach the installation brackets Accessory!2 Self-tapping screw (commercially available) Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. to the sides of the hideaway unit using the sems bolts (M4X8mm).
Fixing area Installation for Antenna Unit Main unit (for left side) Mounting bracket English 1. Mount the antenna main unit to the mounting bracket and check the locations where the antenna are to be fixed. Open the antenna and extended to full length. Adjust tilting and flip-up angles to confirm the actual use condition. 2. Remove the main unit from the mounting bracket.
English Installation 5. After fixing parts with double-sided tape, allow it to sit undisturbed for at least 24 hours. Make sure that no force is applied nor they get wet during this time. 6. Install the antenna (L&R) by following the steps backward described in 2.. Make sure that L and R are installed at the correct side. (Refer to the figure in 2.) 7. Cut the cable holder to the length from the edge of the mounting bracket to the position where the cable is lead in.
Removing Unit ■ Removing the Unit 1 Engage the catch pins on the removal tool and remove the two 1 Refer to the section “Removing the Hard Rubber Frame” and locks on the lower level. Lower the frame and pull it forward as shown in the figure. then remove the hard rubber frame. English ■ Removing the Hard Rubber Frame 2 Remove the Hex-head screw with integral washer (M4×6) on the back panel. Lock Catch 3 Insert the two removal tools deeply into the slots on each side, as shown.
Troubleshooting Guide English What might appear to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems. 42 PROBLEM The power does not turn on. POSSIBLE CAUSE SOLUTION The fuse has blown. After checking for short circuits in the cables, replace the fuse with one having the same rating. No ACC position on vehicle ignition. Connect the same cable to the ignition as the battery cable.
Specifications Specifications subject to change without notice. Picture size ..........................................................5.8 inches wide 124.8(W) X 73(H) X 144.6 (diagonal) mm Display system ....................................Transparent TN LCD panel Drive system..........................................TFT active matrix system Number of pixels ..............280.800 pixels (480 H X 234 V X RGB ) Effective pixels ................................................................99.