www.CookWithKenyon.
Contents IMPORTANT SAFETY INSTRUCTIONS 3 Product Specifications Four Burner 30 Inch Model Four Burner 24 Inch Model Two Burner Portrait Model Two Burner Landscape Model 6 6 7 7 Cleaning and Care Cleaning the Cooktop Use Good Quality Cookware 9 9 Operation How Induction Cooking Works Cookware Noise Indicator Lights Available Power Turning On Operating the Burner(s) Turning Off Automatic Zone Power-Off Power Levels Bridge Mode Boost Mode Simmer Mode Cookware Detection Operation Time Limitation Temperatu
IMPORTANT SAFETY INSTRUCTIONS Read this section BEFORE operating and installing the cooktop. The following information applies to all KENYON Electric Cooktops. THIS COOKTOP, LIKE ALL APPLIANCES, HAS THE POTENTIAL TO CREATE SAFETY PROBLEMS THROUGH CARELESS AND IMPROPER USE. PLEASE OBSERVE ALL OF THE FOLLOWING SAFETY PRECAUTIONS. Proper Installation. Be sure your appliance is properly installed and grounded by a qualified technician.
IMPORTANT SAFETY INSTRUCTIONS Do not cook on a broken cooktop. If the cooktop should break, cleaning solutions and spillovers may penetrate the broken cooktop and create a risk of electric shock. Contact an authorized service center or KENYON Customer Care immediately at (860) 664-4906. Use proper pan size. This appliance is equipped with one or more surface units of different size. Select utensils having flat bottoms large enough to cover the surface unit heating element.
IMPORTANT SAFETY INSTRUCTIONS WARNING: If the surface is cracked, switch off the appliance to avoid the possibility of electric shock. The appliance is not intended to be operated by means of an external timer of separate remote-control system. Danger of fire: Do not store items on the cooking surfaces. Metallic objects such as knives, forks, spoons and lids should not be placed on the cooktop/ hob surface since they can get hot. CAUTION: The cooking process has to be supervised.
Product Specifications Four Burner 30 Inch Model - B80401 (240V) BURNER DATA VOLTAGE 240V AC DIAMETER OUTPUT IN WATTS One 6.75” (171mm) 1400 / 2200 Two 8” (203mm) 1850 / 3000 One 9” (228mm) 2300 / 3500 M aximum load 7000 wat t s combined PRODUCT DIMENSIONS WIDTH 30” 762mm DEPTH 21.25” 540mm HEIGHT 2.93” 74mm CUTOUT DIMENSIONS WIDTH 29” 737mm Four Burner 24 Inch Model - B80405 (240V) DEPTH 20.25” 514mm RADIUS .25” 6.35mm BURNER DATA VOLTAGE 240V AC DIAMETER OUTPUT IN WATTS One 5.
Product Specifications Two Burner Portrait Model - B80301 (240V) BURNER DATA VOLTAGE DIAMETER OUTPUT IN WATTS 240V AC Two 8” (203mm) 1850 / 3000 M aximum load 3500 wat t s combined PRODUCT DIMENSIONS WIDTH 12” 305mm DEPTH 21” 533mm HEIGHT 2.93” 74mm CUTOUT DIMENSIONS WIDTH 10.75” 273mm Two Burner Landscape Model - B80305 (240V) DEPTH 20” 508mm RADIUS .25” 6.
Product Specifications 8 8 7 6 4 5 6 4 5 2 3 1 2 3 7 F F F 21.25in 540mm 21.75in 552mm 30.00in 762mm 24.00in 610mm E 2.03in E [52mm] 2.93in [74mm] WITH POWER CORD E 2.03in [52mm] 2.93in [74mm] WITH POWER CORD D D D C C C 29.00in 737mm 23.00in 584mm 20.25in 514mm B B Four Burner 30 Inch Model UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: ANGULAR: MACH 0.50 BEND 1.00 TWO PLACE DECIMAL .010" THREE PLACE DECIMAL .
Cleaning and Care Cleaning the Cooktop Do not let anything that melts - plastic, aluminum foil, sugar, etc. come into contact with the cooktop surface when it is hot. Should something melt onto the surface, immediately move it to a cool area of the cooktop with a razor blade scraper and then remove it from the cooktop as soon as possible. If they are allowed to harden the cooktop may become pitted.
Operation READ SAFETY INSTRUCTIONS BEFORE OPERATING YOUR APPLIANCE How Induction Cooking Works Indicator Lights There are a series of lights that provide indications of burner operation and hot surfaces. Induction is the most energy efficient method of cooking. The electromagnetic field under the ceramic glass top excites the atoms in the ferrous metal cookware directly above, immediately producing heat saving time and energy. These lights are located adjacent to the control panels.
Operation HOT LIGHT BURNER POWER POWER LIGHT BURNER CONTROL AREA MAIN POWER HEATING LEVEL CONTROL SWEEP UNLESS OTHERWISE SPECIFIED: Turning On Turning Off DIMENSIONS ARE IN INCHES TOLERANCES: ANGULAR: MACH 0.50 BEND 1.00 TWO PLACE DECIMAL .010" THREE PLACE DECIMAL .005" PROPRIETARY AND CONFIDENTIAL INTERPRET GEOMETRIC TOLERANCING PER ANSI/ASME Y14.5M-2009 THE INFORMATION CONTAINED IN THIS MATERIAL DRAWING IS THE SOLE PROPERTY OF KENYON INTERNATIONAL.
Operation Bridge Mode BRIDGE ZONES This mode facilitates cooking with elongated cookware, and allows the two cooking zones to work together as one. When the Bridge mode is active, the following symbols will be displayed in the Burner Control Area: ZONE 2 ZONE 1 ZONE 1 CONTROLS ZONE 2 CONTROLS TWO BURNER MODEL INSTRUCTIONS: ZONE 3 ZONE 4 ZONE 4 CONTROLS ZONE 3 CONTROLS FOUR BURNER MODEL INSTRUCTIONS: The two right side (zone 3 & 4) cooking zones feature Bridge Mode. Activate Bridge Mode 1.
Operation Boost Mode Simmer Mode Boost Mode makes additional power available to each cooking zone (for example, you want to bring a large volume of water to a boil). The power of a cooking zone can be increased or “boosted” for up to 10 minutes. This function allows for gentle cooking even for the most delicate of sauces and chocolate. Activate Simmer by pressing and holding the “LO” setting on the Heating Level Control Sweep of the cooking zone.
Operation Cookware Detection Temperature Setting Guide The cooktop will only apply power to a cooking zone where cookware is detected. In the event that no cookware is identified a “missing pot” error will be displayed on the Burner Control Area.
Operation LOCK LIGHT INDICATES LOCKED UNIT POWER LIGHT LOCK FEATURE Safety Lock Mode 7 MAIN POWER Child Lock UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: ANGULAR: MACH 0.50 BEND 1.00 TWO PLACE DECIMAL .010" THREE PLACE DECIMAL .005" NAME DRAWN CHECKED You can lock the entire cooktop at any time during use or when the unit is powered off but you must first turn the cooktop ON in order to use the lock. Locking the cooktop prevents unwanted cooktop operation.
Operation TIMER DISPLAY KITCHEN AND COOKING TIMER TIMER + AND - BUTTONS Timer Options 7 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES TOLERANCES: ANGULAR: MACH 0.50 BEND 1.00 TWO PLACE DECIMAL .010" THREE PLACE DECIMAL .005" Kitchen Timer This is a general timer that has many uses around the kitchen, independent of cooking activity on the induction cooktop. The timer can be set for periods of up to 1 hour5 59 6 minutes.
Operation Cancel the Cooking Timer by pressing the clock graphic, then dial down to zero. Cooking Timer You can use the timer function to set a cook time for any burner. The burner will lower to power level 1 once the set time has elapsed. The timer can be set for periods of up to 1 hour 59 minutes. Change the Cooking Timer by pressing the clock graphic then the + or – buttons to adjust to the desired time. Activate the Cooking Timer by first selecting the desired cooking zone and power level.
Operation BRIDGE INDUCTION COOKTOP MAINTENANCE The Kenyon Bridge Induction Cooktop is a sealed unit that does not require regular maintenance. Please follow our operating instructions as mentioned above. If your cooktop requires service, this must be preformed by Authorized Personnel only. Please call Kenyon Customer Care at 860-664-4906. Error Code Readout De-power and restart the unit to clear the display. Allow the unit to cool as necessary.
Installation IMPORTANT! IMPORTANT! Save this document for future reference. This appliance must be properly installed and grounded by a qualified technician. Do not remove the clear plastic covering film on the ceramic glass until cooktop is ready to be used. Check the Electrical Supply Requirements Unpacking the Cooktop Carefully unpack the cooktop from its shipping container.
Installation ELECTRICAL SUPPLY REQUIREMENTS KENYON PART NUMBER B80401 B80405 B80301 B80305 MAX CONNECTED LOAD 7000 Watts 7000 Watts 3500 Watts 3500 Watts POWER SUPPLY INPUT 240V AC 30A 50/60Hz 240V AC 30A 50/60Hz 240V AC 15A 50/60Hz 240V AC 15A 50/60Hz MINIMUM WIRE SIZE #14 AWG #14 AWG #14 AWG #14 AWG WARNING! If the electrical supply does not meet the product specifications, consult with a licensed electrician before proceeding with installation! 20
Installation Countertop Preparation 3 Please read this section prior to making cutout for cooktop. It is important to plan ahead for installation of the cooktop, keeping the following dimensions in mind. A - 13 inches maximum depth of overhead cabinets B - 36 inches is minimum height of countertop above floor C - The minimum flat countertop surface that the cooktop will rest upon must be equal to or greater than the overall cooktop dimensions (refer to page 8 for overall cooktop dimensions).
Installation Countertop Preparation Continued... GLASS PANEL Allow a 2” minimum clearance between the bottom of the metal pan of the cooktop and any combustible surface located below, ie: the upper edge of a drawer installed below the cooktop (see figure below). Failure to provide proper clearances and ventilation may result in a fire hazard. PUTTY STRIP COUNTERTOP Attach the two mounting brackets as shown (see figure below) to the inside vertical surface of the cutout.
Installation Electrical Connection Final Preparations Prior to Use Before proceeding further, verify that the power supply is disconnected. Verify that the appropriate electrical supply requirements have been met. Please refer to the table on page 19 for appropriate electrical requirements. The cooktop is supplied with a 36-inch long conduit for a connection to an accessible junction box. The conduit consists of three insulated wires.
KENYON Statement of Warranty Kenyon International, Inc (the “Company”) warrants its products in normal usage to be free of defects in materials and workmanship subject to the conditions and limitations below. Any part, which proves to be defective in normal usage during the warranty period will be repaired or replaced by the Company. In order for product to be covered under this warranty it must be returned to the Company for evaluation. Please contact kenyonservice@cookwithkenyon.
