Full Product Manual

• Keep emitting surface clean.
• Please use dry cloth to clean the lamp.
• Do not use any corrosive detergent.
• Prevent any contact between liquid and electrical parts.
• Alcohol can be used on the cloth to remove the heavy dirt.
• Please read lamp specifications carefully as well as the label on the
product.
Repairing Instructions
• Power off before repairing
• Disconnect the power lines and remove the lamp according to the
instructions.
Note: Do not disassemble the lamp to prevent any danger and damage.
Self-disassembly might not be eligible for the product warranty.
NOTE:
The lamp only applies to indoor installation and other environment with
ceiling.
If components fail, please replace with assigned components supplied by
manufacturer.
If there is ground line attached, the green/yellow line is ground line.
Strip the line carefully according to the instructions.
DO NOT have the metal line exposed to the air directly.
The ground line should be longer than null line and live line.
If there is damage to the wire, please replace with same grade wire.
DO NOT drill the wire or other hard object when installing.
DO NOT allow wires to be caught or twisted between the lamp and the
mounting surface.