Manualshelf

Full Product Manual

ManualsBrandsKERI ManualsCommercial Lighting200-Watt 4 ft. White Integrated LED Linear High Bay Fixture with Natural Light (5000K)
123456789
Installation Steps:
A. Screw the four M8 screw rings to the corresponding position on lamp back
as shown below.
B. NOTE: This step can be ignored if selected lamp has no Wireless Dimming
Function.
Remove the red cover for signal cable and screw the black antenna on the
lamp. The black antenna can be bent to 90 degree as shown below.
C. NOTE: This step can be ignored if selected lamp without Microwave
Sensor.
Put connector A and connector B connected, as shown below.