- Kerio WinRoute Firewall Administrator's Guide

Chapter 8 User Authentication
122
traffic coming from the particular host is detected, WinRoute assumes that it is cur-
rently used by the particular user , and the user is considered being authenticated
from the IP address. However, users may authenticate from other hosts (using the
methods described above).
IP addresses for automatic authentication can be set during definition of user account
(see chapter
13.1).
Note: This authentication method is not recommended for cases where hosts are
used by multiple users (user’s identity might be misused easily).
Login by re-direction is performed in the following way: user enters URL pages that
he/she intends to open in the browser. WinRoute detects whether the user has already
authenticated. If not, WinRoute will re-direct the user to the login page automatically.
After a successful login, the user is automatically re-directed to the requested page or
to the page including the information where the access was denied.
Note: Users will be redirected to a secured or unsecured web interface according to the
fact which version of web interface is allowed (see chapter 9.1). If both versions are
allowed, the secured web interface will be used.
User authentication advanced options
Login/logout parameters can be set on the Authentication Options tab under Users and
Groups → Users.
Figure 8.1 User Authentication Options