- Kerio WinRoute Firewall Administrator's Guide

222
Chapter 16
Other settings
16.1 Routing table
Using Administration Console you can view or edit the system routing table of the host
where WinRoute is running. This can be useful especially to resolve routing problems
remotely (it is not necessary to use applications for terminal access, remote desktop,
etc.).
To view or modify the routing table go to Configuration → Routing Table. This section
provides up-to-date version of the routing table of the operating system including so
called persistent routes (routes added by the route -p command).
Figure 16.1 Firewall’s system routing table
Dynamic and static routes can be added/removed in this section. Dynamic routes are
valid only until the operating system is restarted or until removed by the route system
command. Static routes are saved in WinRoute and they are restored upon each restart
of the operating system.
Warning: Changes in the routing table might interrupt the connection between the
WinRoute Firewall Engine and the Administration Console. We recommend to check the
routing table thoroughly before clicking the Apply button!