- Kerio WinRoute Firewall Administrator's Guide

20.7 Dial Log
287
[15/Mar/2004 15:09:27] Line "Connection" dialing,
console 127.0.0.1 - Admin
[15/Mar/2004 15:09:39] Line "Connection" successfully connected
The first log item is reported upon initialization of dialing. The log always includes
WinRoute name of the dialed line (see chapter 5.1). If the line is dialed from the
Administration Console, the log provides this additional information
• where the line was dialed from (console — Administration Console,
• IP address of the client (i.e. IP address of the Administration Console),
• login name of the user who sent the dial request.
Another event is logged upon a successful connection (i.e. when the line is dialed,
upon authentication on a remote server, etc.).
2. Line disconnection (manual or automatic, performed after a certain period of idle-
ness)
[15/Mar/2004 15:29:18] Line "Connection" hang-up,
console 127.0.0.1 - Admin
[15/Mar/2004 15:29:20] Line "Connection" disconnected,
connection time 00:15:53, 1142391 bytes received,
250404 bytes transmitted
The first log item is recorded upon reception of a hang-up request. The log provides
information about interface name, client type, IP address and username.
The second event is logged upon a successful hang-up. The log provides information
about interface name, time of connection (connection time), volume of incoming
and outgoing data in bytes (bytes received and bytes transmitted).
3. Disconnection caused by an error (connection is dropped)
[15/Mar/2004 15:42:51] Line "Connection" dropped,
connection time 00:17:07, 1519 bytes received,
2504 bytes transmitted
The items are the same as in the previous case (the second item — the disconnected
report).
4. Requested dialing (as a response to a DNS query)
[15/Mar/2004 15:51:27] DNS query for "www.microcom.com"
(packet UDP 192.168.1.2:4567 -> 195.146.100.100:53)
initiated dialing of line "Connection"
[15/Mar/2004 15:51:38] Line "Connection" successfully connected