- Kerio WinRoute Firewall Administrator's Guide

21.1 VPN Server Conﬁguration

303

Figure 21.5 VPN server settings — server port and routes for VPN clients

Notes:

1. If the VPN server is already running, all VPN clients will be automatically dis-

connected during the port change.

2. If it is not possible to run the VPN server at the speciﬁed port (the port is used

by another service), the following error will be reported in the Error log (see

chapter

20.8) upon clicking on the Apply button:

(4103:10048) Socket error: Unable to bind socket

for service to port 4090.

(5002) Failed to start service "VPN"

bound to address 192.168.1.1.

To make sure that the speciﬁed port is really free, view the Error log to see

whether an error of this type has not been reported.

Custom Routes

Other networks to which a VPN route will be set for the client can be speciﬁed in

this section. By default, routes to all local subnets at the VPN server’s side are

deﬁned — see chapter

21.4).