Installation

STEP 1

Place the bolt with the lock washer on the inside of the

tripod mounting bracket.

STEP 2

Tighten with silver spacer-nut. Then place a silver

washer onto the spacer-nut then the nylon washer.

STEP 3

Place the 3/8” bolt through the braking mechanism on

the opposite end with a nylon washer on either side.

STEP 4

Place a 3rd nylon washer over the end of the bolt.

Secure with a nut and tighten. The bolt should still turn

by hand with medium resistance.

STEP 5

Place the other end of the braking mechanism over the

bolt with the silver spacer-nut. Secure loosely with the

threaded knob. When loosened there is free range of

motion. To stabilize, tighten the threaded knob.

VERTICAL BRAKE

INSTALLATION INSTRUCTIONS

PAGE 1
VERTICAL BRAKE INSTALLATION INSTRUCTIONS STEP 1 Place the bolt with the lock washer on the inside of the tripod mounting bracket. STEP 2 Tighten with silver spacer-nut. Then place a silver washer onto the spacer-nut then the nylon washer. STEP 3 Place the 3/8” bolt through the braking mechanism on the opposite end with a nylon washer on either side. STEP 4 Place a 3rd nylon washer over the end of the bolt. Secure with a nut and tighten. The bolt should still turn by hand with medium resistance.