Operation Manual

SG 7209-68

SLEEP MODE

If no RPM or PULSE is detected and no manual setting

is made within 4 minutes, then the device will switch to

Sleep Mode.

Stop or pause training.

– If training is paused and no further settings are

adjusted, the time will continue (TIME). Upon resum-

ing the workout the other units will also continue to

be counted (DISTANCE, CALORIES and PULSE).

– If the workout is stopped using the STOP button and

there is no further setting input, the time counter is

also stopped. After pressing the START button and

resuming the workout all units (TIME, DISTANCE,

CALORIES and PULSE) will continue to be counted.

– If the workout is stopped using the STOP button and

there is a change of user, program or target value

selection, all units (TIME, DISTANCE, CALORIES and

PULSE) will then begin counting from the standard

start value. IMPORTANT! In this case, the previous

training values are not saved!

– If the machine is removed from the mains or recon-

nected e.g. due to a change of location, all units

will be counted (TIME, DISTANCE, CALORIES and

PULSE) from the standard start value. IMPORTANT!

In this case, the previous training values are not

saved!