User Manual

2-2 Wiring
2-9
2
Connection and Configuration
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (GT-70A) -
 Connecting the cable
Use the following procedu res to wire to the DeviceNet connector supplied with the DL-
DN1.
1
Connect the trimmed cable to the DeviceNet connector.
Insert the cable completely.
2
Attach the DeviceNet connector to the DL-DN1.
Plug the connector into the DL-DN1 and secure it down with the screws on each
end. (Tightening torque: 0.2 to 0.3 N•m)
Wire color Signal name Function
Black V - Connects 0 VDC of the communication power supply.
BlueCAN_LCommunication signal (Low)
Bare wire SHIELD Connects the shield of the DeviceNet cable.
White CAN_H Communication signal (High)
Red V + Connects 24 VDC of the communication power supply.
Black
Blue
White
Red