User Manual

3-2 I/O Communication
3-12
- DeviceNet Compatible Network Unit DL-DN1 User’s Manual (GT-70A) -
3
Communicating with the GT-70A series
IN area
n: The first device number assigned to the DL-DN1
The device assignments are the same for all 5-output modes including extended
modes.
Changing a bank
Sensor amplifier ID numbers 01 to 10 are assigned to bits 0 to 9, respectively.
For details of communication methods, see "Changing the Bank Number of
Sensor Amplifiers" (page 3-18).
 3-output mode
OUT area
m: The first device number assigned to the DL-DN1
IN area
n: The first device number assigned to the DL-DN1
The device assignments are the same for all 3-output modes including extended
modes.
Device
(DEC)
Name
Bit 7 Bit 6 ··· Bit 1 Bit 0
Bit 15 Bit 14 ··· Bit 9 Bit 8
n+6 PRESET response
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
n+7 TIMING response
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
n+8 RESET response
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
n+9 Reserved
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
n+10 Reserved
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
Device
(DEC)
Name
Bit 7 Bit 6 ··· Bit 1 Bit 0
Bit 15 Bit 14 ··· Bit 9 Bit 8
m+3 Request to change bank
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
m+4 Select bank number
Specifi es a new bank number
(2-byte unsigned integer; range: 0-3).
Device
(DEC)
Name
Bit 7 Bit 6 ··· Bit 1 Bit 0
Bit 15 Bit 14 ··· Bit 9 Bit 8
n+7 Bank change complete
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09
n+8 Bank change error
ID08 ID07 ··· ID02 ID01
Reserved ID15 ··· ID10 ID09