FLUSHMOUNT CEILING FIXTURE MODEL #83129 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS A C E G B F D PART A B C D E F G DESCRIPTION Canopy Crystal Canopy Stand-Off Threaded Cap Socket Crystal Support 20-Watt G4 Bulb 2 QUANTITY 1 5 5 5 5 5 5
HARDWARE CONTENTS AA BB CC DD EE FF GG Ground Screw Qty: 1 Wire Short Connector Machine Screw Qty: 3 Qty: 2 Canopy Screw Anchor Qty: 4 Qty: 4 Mounting Bracket Qty: 1 Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. Temporarily raise mounting bracket (DD) to ceiling. Mark location for anchor (CC). Use 9/32 size drill to drill holes for anchor (CC). Insert anchor (CC) into hole. 1 Ceiling CC Hardware Used DD CC Anchor x4 2. Connect the mounting bracket (DD) to the outlet box with short machine screws (BB). 2 Outlet Box (Not Included) Hardware Used BB Short Machine Screw x2 DD Mounting Bracket x1 3. Screw anchor screws (GG) through mounting bracket (DD) and into anchors (CC).
ASSEMBLY INSTRUCTIONS 4. Wire connection guide: 4 Ground wire: (bare copper or marked GND) • For installation in the United States: Wrap ground wire from outlet box around ground screw (EE) on mounting bracket (DD), no less than 2 in. from wire end. Tighten ground screw (EE). If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).
ASSEMBLY INSTRUCTIONS 6. Screw canopy screw (FF) a quarter of the way into mounting bracket (DD). Raise canopy (A) to the mounting bracket (DD) passing canopy screw (FF) through the cut away on canopy (A). Screw canopy screw (FF) the rest of the way to secure. 6 DD FF A Hardware Used FF Canopy Screw x4 7. Insert 20-watt max. G4 base bulb (G) into socket (E). Screw crystal support (F) onto socket (E). Pass crystal (B) over crystal support (F) and secure with threaded cap (D).
CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish. • All glass shades may be washed in a towel-lined sink with warm water and mild soap. Do not wash shades in an automatic dishwasher. TROUBLESHOOTING PROBLEM Fixture does not light. POSSIBLE CAUSE CORRECTIVE ACTION 1. Fixture may be wired incorrectly. 1.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART B D F AA BB CC DD FF GG B Rev.
PLAFONNIER ENCASTRÉ MODÈLE #83129 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE A C E G B F D PIÈCE A B C D E F G DESCRIPTION Pavillon Cristal Support du pavillon Capuchon fileté Douille Support du cristal Ampoule G4 de 20 watts 10 QUANTITÉ 1 5 5 5 5 5 5
QUINCAILLERIE INCLUSE BB AA Capuchon de connexion Qté : 3 CC DD EE FF GG Vis de mise à la terre Qté : 1 Vis à métaux Pièce courtes d’ancrage Qté : 2 Qté : 4 CONSIGNES DE SÉCURITÉ Support de fixation Qté : 1 Vis du pavillon Qté : 4 Vis à pièce d’ancrage Qté : 4 Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. • • • • • AVERTISSEMENT IMPORTANT : NE tentez JAMAIS de travailler sans couper l'électricité.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. Placez temporairement le support de fixation (DD) au plafond. Marquez les emplacements des ancrages (CC). Utilisez une perceuse équipée d'un foret de 9/32 po afin de percer les trous pour les ancrages (CC). Insérez les ancrages (CC) dans les trous. 1 Plafond CC Quincaillerie utilisée CC Pièce d’ancrage x4 2. Fixez le support de fixation (DD) à la boîte de sortie à l’aide des vis à métaux courtes (BB).
INSTRUCTIONS POUR L'ASSEMBLAGE 4. Guide de raccordement électrique 4 Fil de mise à la terre (cuivre nu ou marquage GND) : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre (EE) située sur le support de fixation (DD), à au moins 5 cm (2 po) de l’extrémité du fil. Serrez la vis de mise à la terre (EE).
INSTRUCTIONS POUR L'ASSEMBLAGE 6. Vissez la vis du pavillon (FF) sur un quart de sa longueur dans le support de fixation (DD). Placez le pavillon (A) sur le support de fixation (DD) en faisant passer la vis du pavillon (FF) dans la découpe située sur le pavillon (A). Pour fixer, vissez à fond la vis du pavillon (FF). 6 DD FF A Quincaillerie utilisée FF Vis du pavillon x4 7. Insérez une ampoule G4 de 20 watts max. (G) dans la douille (E). Vissez le support du cristal (F) dans la douille (E).
ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire. • Les abat-jour en verre peuvent être nettoyés dans un évier couvert de serviettes, à l’aide d’eau tiède et de savon doux. Ne nettoyez pas les abat-jour dans un lave-vaisselle. DÉPANNAGE PROBLÈME Le luminaire ne s’allume pas.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE B D F AA BB CC DD FF GG B Rev.