Installation Guide

ASSEMBLY INSTRUCTIONS

Hardware Used

x 2Wire Connector

CONNECT HOT, BLACK OR RED OUTLET SUPPLY WIRE TO: CONNECT NEUTRAL, WHITE OUTLET SUPPLY WIRE TO:

Black White

* Parallel Cord (round and smooth) * Parallel Cord (square and ridged)

Clear, Brown, Gold or Black without Tracer (colored stripes) Clear, Brown, Gold or Black with Tracer (colored stripes)

Insulated Wire (not green) with Copper Metal Conductor Insulated Wire (not green) with Silver Metal Conductor

5. Supply wire connection guide: Make wire connections, securing with wire connectors (AA), following

the reference chart listed below.

*NOTE:

When parallel wire (SPT I & SPT II) is used,

the neutral wire is square shaped and ridged

and the hot wire will be round in shape and

smooth.

Hardware Used

4. Wire connection guide:

Ground wire: (bare copper or marked GND)

• For installation in the United States:

Wrap ground wire from outlet box around

ground screw (EE) on mounting bracket (DD),

no less than 2 in. from wire end. Tighten

ground screw (EE). If fixture is supplied with

a ground wire, connect to outlet ground wire

with a wire connector (AA).

• For installation in Canada:

If fixture is supplied with ground wire, wrap

ground wire around ground screw (EE) on

mounting bracket (DD). Tighten ground

screw (EE).

x 1Wire Connector