Installation Guide

ASSEMBLY INSTRUCTIONS

6. Screw canopy screw (FF) a quarter of the way

into mounting bracket (DD). Raise canopy (A)

to the mounting bracket (DD) passing canopy

screw (FF) through the cut away on canopy (A).

Screw canopy screw (FF) the rest of the way to

secure.

7. Insert 20-watt max. G4 base bulb (G) into

socket (E). Screw crystal support (F) onto

socket (E). Pass crystal (B) over crystal support

(F) and secure with threaded cap (D).

Hardware Used

x 4Canopy Screw

Note: Never touch a halogen light bulb with your bare

skin, even when removing the bulb from the

package before installing. The oils on your skin

will drastically shorten the lifespan of the bulb.