LED FLUSHMOUNT CEILING FIXTURE MODEL #83812 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS C B D A F G H E PART A B C D DESCRIPTION Canopy Mounting Bracket LED Driver Driver Connector QTY. 1 1 1 2 PART E F G H 2 DESCRIPTION Diffuser Housing Diffuser Diffuser Screw Diffuser Clip QTY.
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB Short Machine Screw Qty: 2 CC Long Machine Screw Qty: 2 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list. If any part is missing or damaged, do not attempt to assemble the product. Estimated assembly time: 30 minutes to 1 hour Tools Required for Assembly (not included): Phillips screwdriver, flathead screwdriver, wire strippers, electrical tape, ladder, safety glasses. ASSEMBLY INSTRUCTIONS 1.
ASSEMBLY INSTRUCTIONS 2. Insert two long machine screws (CC) 3/4 of the way into the mounting bracket (B) for securing the pan (A) in later steps. The head of long machine screws (CC) should be on the opposite side of the outlet box. 2 Outlet Box Connect the mounting bracket (B) to outlet box with short machine screws (BB). Hardware Used CC BB Short Machine Screw x2 Long Machine CC Screw x2 BB B 3.
ASSEMBLY INSTRUCTIONS 5. Lower diffuser (F) into the diffuser housing (E) and secure with diffuser clips (H) and diffuser screws (G). 5a Raise diffuser housing (E) to pan (A). Place the stand-offs found on the diffuser housing (E) into the key holes found on the pan (A) and twist to lock in place. F G H E 5b A E CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture.
WARRANTY élan Lighting warrants that its products will be free from defects in material and workmanship for three (3) year from the date of purchase by the Original Purchaser. LED Rail, LED Lanterns. LED Wall Sconces, LED Pendants and LED Chandeliers for single family residences are warranted for three (3) year on the Light Engine and all other electrical components.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART AA BB CC DESCRIPTION Wire Connector Short Machine Screw Long Machine Screw AA PART # WC001 SCR832X050 SCR832X150 BB CC Printed in China Rev.
PLAFONNIER ENCASTRÉ À DEL MODÈLE #83812 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE C B D A F G H E PIÈCE A B C D DESCRIPTION QTÉ 1 1 1 2 PIÈCE E F G H 10 DESCRIPTION Corps du diffuseur Diffuseur Vis de diffuseur Attache de diffuseur QTÉ 1 1 3 3
QUINCAILLERIE INCLUSE AA Capuchon de connexion Qté : 3 BB Vis à métaux courte Qté : 2 CC Vis à métaux longue Qté : 2 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité. • Rendez-vous au coffre de fusibles principal ou au disjoncteur de votre demeure.
PRÉPARATION Avant de commencer l’assemblage du produit, assurez-vous que toutes les pièces sont présentes. Comparez les pièces avec la liste du contenu de l’emballage et la liste de la quincaillerie. En cas de pièces manquantes ou endommagées, ne tentez pas d’assembler le produit. Temps d’assemblage approximatif : de 30 à 60 minutes. Outils nécessaires pour l’assemblage (non inclus) : tournevis cruciforme, tournevis à tête plate, pinces à dénuder, ruban isolant, escabeau, lunettes de sécurité.
INSTRUCTIONS POUR L'ASSEMBLAGE 2. Insérez deux vis à métaux longues (CC) sur les 3/4 de leur longueur dans le support de fixation (B) pour fixer le pavillon (A) ultérieurement. La tête des vis à métaux longues (CC) doit se trouver à l'opposé de la partie surélevée du support de fixation (B). 2 Boîte de sortie Fixez le support de fixation (B) à la boîte de sortie à l'aide des vis à métaux courtes (BB). Quincaillerie utilisée CC BB Vis à métaux courte x2 Vis à métaux CC longue x2 BB B 3.
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Diffuseur baisser (F) dans le corps du diffuseur (E) et fixer avec des attache de diffuseur (H) et les vis de diffuseur (G). 5a F G H Placez corps du diffuseur (E) sur le pavillon (A). Insérez les entretoises situées sur corps du diffuseur (E) dans les trous en forme de serrure situés sur le pavillon (A) et tournez pour verrouiller l'ensemble. E 5b A E ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire.
GARANTIE élan Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant trois (3) an à compter de la date d'achat par l'acheteur initial. Rails à DEL, lanternes à DEL. Les appliques à DEL, les suspensions à DEL et les lustres à DEL utilisés dans une résidence familiale unique sont garantis pendant trois (3) an en ce qui concerne le moteur lumière et tous les autres composants électriques.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE AA BB CC Nº DE PIÈCE DESCRIPTION Capuchon de connexion Vis à métaux courte Vis à métaux longues AA WC001 SCR832X050 SCR832X150 BB CC Imprimé en Chine Rev.