LED 2-RING PENDANT MODEL #83864, 83866 Français p. 9 ATTACH YOUR RECEIPT HERE Serial Number Purchase Date Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday.
PACKAGE CONTENTS B A C D E PART A B C D E DESCRIPTION Canopy Mounting Bracket Compression Fitting Cable LED Assembly 2 QUANTITY 1 1 6 6 2
HARDWARE CONTENTS AA Wire Connector Qty: 3 BB CC Canopy Screw Short Machine Qty: 4 Screw Qty: 2 DD FF EE Washer Qty: 4 Anchor Qty: 4 Anchor Screw Qty: 4 SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • • • • • • WARNING IMPORTANT: NEVER attempt any work without shutting off the electricity. Go to the main fuse box, or circuit breaker, in your home.
ASSEMBLY INSTRUCTIONS 1. The hanging length of the cable (D) for this fixture is adjustable. Hold the fixture canopy (A) up against the ceiling to determine the desired length before the entire fixture is assembled. 1a A C D The cable (D) is held in place by a compression fitting (C). Push up, and hold, the fitting’s spring loaded tube (C) to release the cable (D) for adjustment. 1b D C 2. Temporarily affix the mounting bracket (B) to the electrical box and mark location for anchor (DD).
ASSEMBLY INSTRUCTIONS 5. Connect safety cable located in canopy (A) to the safety cable loop located on mounting bracket (B). 5 B Safety Cable Loop A Safety Cable 6. Wire connection guide: Ground wire: 6 • For installation in the United States: Wrap ground wire from outlet box around ground screw preassembled on mounting bracket (B) no less than 2 in. from wire end. Tighten ground screw. If fixture is supplied with a ground wire, connect to outlet ground wire with a wire connector (AA).
ASSEMBLY INSTRUCTIONS 7. Pass the canopy (A) over the arms protruding from the mounting bracket (B) and secure with washers (FF) and canopy screws (CC). 7 B Hardware Used Canopy Screw x4 FF Washer x4 CC A FF CC CARE AND MAINTENANCE • Always be certain that electric current is turned off before cleaning this item. • Use a soft, moist cloth with mild non-abrasive soap to clean fixture. Never use glass cleaner on fixture, as it will damage the metal finish.
WARRANTY élan Lighting warrants that its products will be free from defects in material and workmanship for three (3) year from the date of purchase by the Original Purchaser. LED Rail, LED Lanterns. LED Wall Sconces, LED Pendants and LED Chandeliers for single family residences are warranted for three (3) year on the Light Engine and all other electrical components.
REPLACEMENT PARTS LIST For replacement parts, call our customer service department at 1-855-226-7169, 8 a.m. - 4 p.m., EST, Monday - Friday. PART B AA BB CC DD EE FF DESCRIPTION Mounting Bracket Wire Connector Short Machine Screw Canopy Screw Anchor Anchor Screw Washer B AA PART # XBAR83863 WC001 SCR832X050 CS83853 AB001 AS001 W83863 CC BB DD EE FF Printed in China Rev.
LUMINAIRE SUSPENDU À 2 ANNEAUX À DEL MODÈLE #83864 JOIGNEZ VOTRE REÇU ICI Numéro de série Date d’achat Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi.
CONTENU DE L’EMBALLAGE B A C D E PIÈCE A B C D E DESCRIPTION Pavillon Support de fixation Raccord à compression Câble Ensemble DEL 10 QUANTITÉ 1 1 6 6 2
QUINCAILLERIE INCLUSE AA BB CC Capuchon de connexion Vis à Vis du Qté : 3 métaux pavillon courte Qté : 4 Qté : 2 DD EE FF Rondelle Qté : 4 Ancrage Vis de Qté : 4 l'ancrage Qté : 4 CONSIGNES DE SÉCURITÉ Veuillez vous assurer de lire et de comprendre l’intégralité du présent guide avant d’assembler, d’utiliser ou d’installer ce produit. AVERTISSEMENT • IMPORTANT : Ne faites JAMAIS de travail sans couper l'électricité.
INSTRUCTIONS POUR L'ASSEMBLAGE 1. La longueur du câble de suspension (D) de ce luminaire est réglable. Maintenez le pavillon (A) du luminaire contre le plafond pour déterminer la longueur désirée avant l'assemblage complet du luminaire. 1a A C D Le câble (D) est maintenu en place par un raccord à compression (C). Poussez vers le haut et maintenez le tube à ressort du raccord (C) pour libérer le câble (D) et permettre le réglage. 1b D C 2.
INSTRUCTIONS POUR L'ASSEMBLAGE 5. Connectez le câble de sécurité situé dans le pavillon (A) à la boucle du câble de sécurité située sur le support de fixation (B). 5 B Boucle du câble de sécurité A Câble de sécurité 6. Guide de raccordement électrique Fil de mise à la terre : • Pour une installation aux États-Unis : enroulez le fil de mise à la terre provenant de la boîte de sortie autour de la vis de mise à la terre située sur le support de fixation (I), à au moins 5,08 cm de l’extrémité du fil.
INSTRUCTIONS POUR L'ASSEMBLAGE 7. Placez le pavillon (A) sur les bras sortant du support de fixation (B) et fixez-le à l'aide des rondelle (FF) et vis du pavillon (CC). 7 B Quincaillerie utilisée CC Vis du pavillon FF Rondelle x4 A FF CC x4 ENTRETIEN • Vérifiez toujours que le courant est coupé avant de nettoyer le luminaire. • Utilisez un linge doux et humide ainsi qu’un savon non abrasif. N’utilisez jamais de nettoyants pour vitres; vous risqueriez d’endommager le fini métallique du luminaire.
GARANTIE élan Lighting garantit que ses produits seront libres de tout vice de fabrication ou défaut matériel pendant un (1) an à compter de la date d'achat par l'acheteur initial. Pour remplacer un produit porteur d'un défaut couvert par la garantie, l'acheteur initial doit retourner tout produit ou pièce supposés défectueux au distributeur élan agréé où le produit a été acheté avec une PREUVE D'ACHAT, le nom de l'acheteur initial, l'adresse de retour et une description du défaut constaté sur le produit.
LISTE DES PIÈCES DE RECHANGE Pour obtenir des pièces de rechange, appelez notre service à la clientèle au 1 855 226-7169, entre 8 h et 16 h (HNE), du lundi au vendredi. PIÈCE B AA BB CC DD EE FF Nº DE PIÈCE DESCRIPTION Support de fixation Capuchon de connexion Vis à métaux courtes Vis du pavillon Ancrage Vis de l'ancrage Rondelle B AA XBAR83863 WC001 SCR832X050 CS83853 AB001 AS001 W83863 CC BB DD EE FF Imprimé en Chine Rev.