Owner's Manual

rfKICKER
MODEL:
Authorized
KICKER Dealer:
Purchase Date:
Serial
Number:
KICKER
MARINE
Tower
Enclosures
Owner's
Manual
KMTES
I
KMTED
The
KICKER
KM
Tower Enclosures are the perfect way to bring your music out into the marine or power sports
environment. Whether upgrading
an
existing system or starting fresh, the
KM
Tower Enclosures are compatible
with any of the
KICKER
KM
or
KICKER
6.5 inch (165mm) speakers
(KM6000 will
require new mounting
holes
to
be drilled). The injection-molded ABS enclosures are
UV
treated, splash resistant, and weather resilient. Mount
the
KM
Tower Enclosures
in
your boat or get creative with a pair of them
in
the garage, on your 4x4 or Side-by-
Side's
roll
bars, or
in
any other bar-mounted application.
INSTALLATION
Mounting:
Your
KM
Tower enclosures
include
plastic adaptor inserts for use with the four most
popular
tower
tubing diameters: 2-1 /4", 2-3/8",
2-1
/2" and 2-5/8" (without inserts).
If
your tubing diameter
is
different, you may
need to use the KMTAP Accessory pack, which includes adaptors for 1-5/8", 1-3/4", 1-7 /8" and
2"
.
For
other
tubing diameters, additional shims may be needed.
Study your mounting bar for the best possible mounting locations. Spreading the
KM
Tower
Enclosures
apart
will
provide better stereo performance, and
is
usually preferable. When determining the best locations for mounting,
be careful to
look
for obstacles or obstructions that
could
com~\licate
mounting the
KM
Tower Enclosures.
Please keep
in
mind the routing of your speaker wires as this can affect
where
you
finally
mount your
KM
Tower
En
closures.
Aiming:
The mounting hardware design provides flexibility
in
angular
mounting of your
KM
Tower Enclosures.
This
is
accomplished by using the included female-threaded
internal
mounting plates.
It
is
recommended that
you
loosely assemble your
KM
Tower Enclosures and attach them to your mounting bar/tower to determine
proper angular alignment.
steel mounting
plate
2