User's Manual

Note
Before you confirm the deletion,
you could press the or
button to switch the LCD display
from “dEL ALL” to “dEL no”. Then
press the button, you could
stop clearing the memory.
2.
Press and hlod the and button about 5 seconds, the LCD
will display “dEL ALL” and blink.
1.
Enter the memory recall mode as described in the previous section
"Recall the records".
3.
Press the button to confirm the deletion, the LCD will display
“dEL ALL donE”.
B: Delete all records (Example shown below for User 1)
Delete the Records
2.
Press and hlod the button about 3 seconds, the LCD will display
“dEL yES” and blink.
1.
Enter the memory recall mode as described in the previous section
"Recall the records", find out the record you want to delete.
Delete the records by following the steps below.
3.
Press the button to confirm the deletion, the LCD will display
“dEL donE” and then the previous record will be displayed.
Note
Before you confirm the deletion,
you could press the or
button to switch the LCD display
from “dEL yES” to “dEL no”. Then
press the button, you could
stop clearing the memory.
A: Delete one record (Example shown below for User 1)
1918
DATA MANAGEMENTDATA MANAGEMENT