User's Manual

ManualsBrandsKinetik Wellbeing ManualsBlood Pressure MonitorsAdvanced Blood Pressure Monitor

In order to get the best effect and protect your monitor, please use the right

batteries and special power adapter which complies with local safety standard.

CAUTION

AC adapter

(Not included)

USB cable

The Choice of Power Supply

Installing and Replacing the Batteries

Low Battery

CAUTION

Do not use new and used batteries together.

Do not use different types of batteries together.

Do not dispose the batteries in fire. Batteries may explode or leak.

Remove batteries if the device is not likely to be used for some time.

Worn batteries are harmful to the environment. Do not dispose with daily garbage.

Remove the old batteries from the device following your local recycling guidelines.

•

Slide off the battery cover.

•

Install or replace 4 AAA size batteries

according to the polarity indications

inside the battery compartment.

• Place the battery cover back on.

Any time the battery is low, it will display

the icon & ”Lo bAt ” and then power

off automatically after about 5 seconds.

Replace the batteries:

• When the low battery symbol appears.

(see the LCD display on the right picture)

• When any button is pressed and

nothing is displayed on the screen.

/min

mmHg

1. Battery powered mode:

6V DC 4× AAA batteries

2. AC adapter powered mode: 5V 1A

(Please only use AC adapter authorised

by the manufacturer!) (Not included)

Please unplug the adapter to depart from

the using utility power, when you finish the

measurement.

Setting the Date and Time

It is important to set the date and time before using your blood pressure

monitor for the first time, so that a correct time stamp can be assigned to

each record that is stored in the memory.

(The setting range of the year: 2021—2050, Time format: 24H / 12H)

Press and hold the button to quickly advance the years.

Press and hold the button to quickly go backwards through the years.

When the monitor is off, press and hold the button to display the

date format. Press the or button to switch the date format

between [month/day/year] and [day/month/year].

Press the button to confirm the date format, then the year will

flash. Press the or button to change the year.

[month/day/year] format

[day/month/year] format

Press the button to confirm the year, then the month will flash.

Repeat the same steps to change the month, day, time format, hour,

and minute.

BEFORE YOU START BEFORE YOU START