Installation & Assembly

FRAME ASSEMBLY
Decide which canopy size you would like to assemble, 12ft x 20ft or 20ft x 20ft, and lay out the parts according
to the diagrams below. The large diameter pipes are used to form the roof rafter and the small diameter pipes
are used to form the length of the canopy. Set aside eight (A) 77.5 inch large diameter pipes for the legs.
Note: Connect pipe together starting with the center peak of frame, then roof rafters and then sides of
frame.
Diagram # 1
12ft x 20ft Frame Layout
Please Note: The (C) 77.5 inch
small diameter pipes are used to
form the length of the canopy.
The (B) 77.5 inch large diameter
pipes are used for roof rafters and
legs.
NOTE: DO NOT PUT LEGS IN
FRAME UNTIL YOU HAVE
ASSEMBLED COVER AND
ATTACHED COVER TO FRAME
Diagram # 2
20ft x 20ft Frame Layout
Please Note: The (C) 77.5 inch
small diameter pipes are used to
form the length of the canopy.
The eight (D) 45 inch large
diameter swage pipes are joining
together with eight (B) 77.5 inch
large diameter pipes to form the
roof rafters. The remaining eight
(A) 77.5 large diameter pipes are
for the legs.
NOTE: DO NOT PUT LEGS IN
FRAME UNTIL YOU HAVE
ASSEMBLED COVER AND
ATTACHED COVER TO FRAME