Specification Sheet

Multiple Wattage Unit Heater
The KBP is the industry standard for multi-wattage garage / shop heaters. Designed for rugged performance,
the flow-through design efficiently moves air by pulling air from the back of the heater and discharges it out the front, easily heating a
large space. With high quality components suitable for both residential and commercial applications, it comes standard with a 3-position
switch and an accurate built-in thermostat. The integral fan delay continues to dissipate heat from the elements during the cool down
period, maximizing the heat exchange in the room. King’s exclusive dual Pic-A-Watt steel fin elements allow customers to select from a
range of wattage options, tailoring the heater to an area’s specific heating requirements.
Compact Unit Heater KBP Series
A: Series
B: 12 - 120V 24 - 240V
20 - 208V 27 - 277V
48 - 480V
C: Watts (950 to 6000)
KBP
A
24
B
06
C
Pic-A-Watt
®
element High accuracy built-in thermostat Universal (wall/ceiling) mounting bracket
Multiple wattage selection Fan delay Standard color: Onyx Gray
Long life cast iron motor Patented Smart Limit Protection
®
5-year limited warranty
Aluminum fan blade Selector switch—fan/heat/off
Engineering Specifications
Pic-A-Watt Heating Element: Exclusive King multi-tap element allows
field adjustment to several wattages at time of installation. Steel sheath
elements of various resistance are copper brazed to steel plate fins
producing a multi-wattage heating element.
Built-in Thermostat: Single pole factory installed hydraulic capillary tube
thermostat for precision heating control. Operating range 40° to 90° F.
Fan/Heat/Off Switch: 3-position switch provides heating and summer fan
only operation.
Fan Delay Switch: The fan continues to operate after the thermostat
shuts off in order to remove the residual heat left in the elements.
Power must not be interrupted.
CFM: 270
Universal Mounting Bracket: Combination ceiling/wall bracket is
included with every heater.
Unit Bearing Motor: Permanently lubricated, long life, unit bearing
4-Pole motor with 20 cc of oil. Enclosed rotor provides long-lasting,
trouble-free operation. Thermally protected. 1300 RPM.
Electrically Held Smart Limit Protection: Heater shuts off when an
over temperature condition exists and automatically resets when the
normal operating temperature returns.
Tested: UL 2021
Approval: cCSAus
*Approved for 208V operation. Heater will draw 13% less Amps and 25% less wattage **3-Phase units do not have Heat / Fan / Off ** Prewired for 3-Phase, Field Convertable to 1-Phase
***480 Volt models are 24 Volt control Minimum clearance from combustibles: 18” from front, 2” from top, 6” from sides and 5” from rear. Minimum clearance 6’ from floor.
Ordering Information
KBP1230 15191 120 1 2850-1900-950 24-16-8 26
KBP2406* 15190 240/208* 1 5700-4750-3800-2850-1900-950 24-20-16-12-8-4 24
KBP2006-3MP** 15193 208* 1-3 5700-2850 27-15 26
KBP2406-3MP** 15188 240/208* 1-3 5700-2850 24-14 25
KBP2704 15187 277 1 4000-3000-2000-1000 14 26
KBP4804-3MP** 15196 480*** 1-3 4160 9-5 26
KBP4806-3MP** 15197 480*** 1-3 6000 13-8 26
MODEL UPC VOLTS PHASE WATTAGE AMPS
Contractor shall supply and install KBP Series unit heaters manufactured by King Electrical Mfg. Company. Heaters shall be of the wattage
and voltage as indicated on the plans.
WEIGHT (lbs.)