Manual

4
15
1/4"
2" MPT/
1 1/2" FPT
7
3/16
"
®
Installation
New Water® Cycler
ABOVE GROUND POOLS
The New Water® Cycler comes in several different
models. Please review this list, determine which
model you have and follow the appropriate installation
instructions for that model only.
Cycler Model #120
In-line for above ground
pools ranging from 5,000
to 25,000 gallons. Uses
a pre-filled chlorine pac,
model 105C. Installation
instructions are on pages 7
and 8.
Replacement Cycler Pac
Model 105C for use in the
New Water® Cycler Model
120.
IN GROUND POOLS
Cycler Model #400
In-line for in ground pools
ranging from 5,000 to
40,000 gallons. Uses
a pre-filled chlorine pac,
model 407C. Installation
instructions are on page 9.
Replacement Cycler Pac
Model 407C for use in the
New Water® Cycler Models
400 and 430.
Cycler Model #430
Off-line for in ground pools
ranging from 5,000 to
25,000 gallons. Uses
a pre-filled chlorine pac,
model 407C. Installation
instructions are on pages
10 and 11.
IN GROUND - Off-line
Installation Tips
• Do not plumb into copper pipe as corrosion will occur.
• By installing a ow indicating device on the inlet line
you can monitor the gallons per minute.
See manufacturer’s directions for the installation of the
ow indicating device.
Before installing any of these Cyclers, make
sure that:
• You have all the supplies.
• The pump is turned off.
• The plumbing lines are dry.
17"
2" FPT
7"
®
®