Datasheet

ManualsBrandsKINGBRIGHT ManualsHighPower-LEDsHighPower LED Red 75 lm 130 ° 11 V 500 mA

SPEC NO: DSAI0428 REV NO: V.2 DATE: FEB/18/2008 PAGE: 1 OF 7

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.Chen ERP: 1209000032

LINEAR HIGH POWER LED

PRELIMINARY SPEC

Part Number: KAS-4805SELS/5 Hyper Orange

Features

z DIMENSION: 48mm X 5mm X 1.6mm.

z INSTANT LIGHT.

z LINEAR TYPE.

z HIGH EFFICIENCY.

z LONG OPERATING LIFE.

z LOW POWER CONSUMPTION.

z MORE ENERGY EFFICIENT THAN INCANDESCENT,

MOST HALOGEN LAMPS, AND FLUORESCENT LAMP.

z RoHS COMPLIANT.

Description

The package containing fifteen chips is capable of providing

high brightness.

High thermal dissipation efficiency is achieved by incorpo-

rating aluminium as reflector and also substrate to ensure

long operating life.

The Hyper Orange device is made with TS AlInGaP light

emitting diode.

Applications

Ceiling lights.

Contour lights.

Decoration lights.

General lighting.

Architectural lighting.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3.Specifications are subject to change without notice.

Summary of content (7 pages)

PAGE 1
LINEAR HIGH POWER LED PRELIMINARY SPEC Part Number: KAS-4805SELS/5 Hyper Orange Features Description z DIMENSION: 48mm X 5mm X 1.6mm. The package containing fifteen chips is capable of providing z INSTANT LIGHT. high brightness. z LINEAR TYPE. High thermal dissipation efficiency is achieved by incorpo- z HIGH EFFICIENCY. rating aluminium as reflector and also substrate to ensure z LONG OPERATING LIFE. long operating life. z LOW POWER CONSUMPTION.
PAGE 2
Precautions 1. Do not touch the lens with any sharp object. 2. No stress should be applied on the lens. 3. Thermal grease between the strip and heat sink is recommended to fill air gaps for better thermal conductivity. 4. For securing the LED strip, M2 screws are recommended. The strip should not be bent or stressed in any way which could damage the internal circuit. 5.
PAGE 3
Absolute Maximum Ratings Parameter Symbol Rating Units Forward Current IF 500 mA Forward Pulse Current [1] IFP 700 mA Power Dissipation Pd 4.75 W LED Junction Temperature Tj 110 °C Operating Temperature Topr -30~+100 °C Storage Temperature Tstg -40~+120 °C Tc 100 °C Case Temperature Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. Electrical / Optical Characteristics Part Name Device Parameter Symbol Min. Typ. Max. Units Conditions Forward Voltage [2] VF 8.5 9 9.
PAGE 4
SPEC NO: DSAI0428 REV NO: V.2 DATE: FEB/18/2008 PAGE: 4 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.
PAGE 5
SPEC NO: DSAI0428 REV NO: V.2 DATE: FEB/18/2008 PAGE: 5 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.
PAGE 6
SPEC NO: DSAI0428 REV NO: V.2 DATE: FEB/18/2008 PAGE: 6 OF 7 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: R.
PAGE 7
PACKING & LABEL SPECIFICATIONS KAS-4805SELS/5 (1) Primary packing An empty tray is placed on top of twenty-tier tray which contain 50 pieces each. Tray (Dimensions:398X218X12mm/Materials:Electrically conductive PS) (2)second packing A set of twenty-one trays is placed in 5# box .(Dimensions of box:410mmX229mmX159mm maximum of 1000 pieces per box) An indication label which specifies product name, quantity, lot number and shipment date is attached to the outside of the 9# box.