Datasheet

ManualsBrandsKINGBRIGHT ManualsDisplaysSeven-segment display Blue 5.08 mm 3.05 V No. of digits: 2

SPEC NO: DSAH2182 REV NO: V.6B DATE: MAY/30/2013 PAGE: 1 OF 5

APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.Huang ERP: 1352000349

SURFACE MOUNT DISPLAY

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Part Number: KCDA02-136 Blue

Features

z 0.2 inch digit height.

z Low current operation.

z Excellent character appearance.

z Mechanically rugged.

z Package :300pcs / reel.

z Gray face, white segment.

z Moisture sensitivity level : level 2a.

z RoHS compliant.

Description

The Blue source color devices are made with InGaN

on SiC Light Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Package Dimensions& Internal Circuit Diagram

Notes:

1. All dimensions are in millimeters (inches), Tolerance is ±0.25(0.01")unless otherwise noted.

2. The specifications, characteristics and technical data described in the datasheet are subject to change without prior notice.

3.The gap between the reflector and PCB shall not exceed 0.25mm.

PB-A

Summary of content (5 pages)

PAGE 1
SURFACE MOUNT DISPLAY ATTENTION Part Number: KCDA02-136 Blue OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z 0.2 inch digit height. The Blue source color devices are made with InGaN z Low current operation. on SiC Light Emitting Diode. z Excellent character appearance. Static electricity and surge damage the LEDS. z Mechanically rugged. It is recommended to use a wrist band or anti-electrostatic z Package :300pcs / reel.
PAGE 2
Selection Guide Part No. Dice KCDA02-136 Iv (ucd) [1] @ 10mA Lens Type Blue (InGaN) White Diffused Min. Typ. 2200 4300 Description Common Anode, Rt. Hand Decimal. Note: 1. Luminous intensity/ luminous Flux: +/-15%. 2. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ. λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Max.
PAGE 3
Blue KCDA02-136 SPEC NO: DSAH2182 REV NO: V.6B DATE: MAY/30/2013 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.
PAGE 4
KCDA02-136 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.15) Reel Dimension Tape Specifications SPEC NO: DSAH2182 REV NO: V.6B DATE: MAY/30/2013 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.
PAGE 5
PACKING & LABEL SPECIFICATIONS KCDA02-136 Detailed application notes are listed on our website. http://www.kingbright.com/application_notes SPEC NO: DSAH2182 REV NO: V.6B DATE: MAY/30/2013 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Joe Lee DRAWN: D.N.