Datasheet

SPEC NO: KDA0117 REV NO: V.1 DATE: SEP/07/2001 PAGE: 1 OF 4

APPROVED:J.Lu CHECKED: DRAWN: S. H. CHEN

Description

The Super Bright Yellow source color devices are made

with DH InGaAlP on GaAs substrate Light Emitting

Diode.

3.2x1.6mm SMD CHIP LED LAMP

KP-3216SYC SUPER BRIGHT YELLOW

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.0079") unless otherwise noted.

3. Lead spacing is measured where the lead emerge package.

4. Specifications are subject to change without notice.

Features

!3.2mmx1.6mm SMT LED, 1.1mm THICKNESS.

!LOW POWER CONSUMPTION.

!WIDE VIEWING ANGLE.

!IDEAL FOR BACKLIGHT AND INDICATOR.

!VARIOUS COLORS AND LENS TYPES AVAILABLE.

!PACKAGE : 2000PCS / REEL.

Package Dimensions

PAGE 1
3.2x1.6mm SMD CHIP LED LAMP KP-3216SYC SUPER BRIGHT YELLOW Features Description !3.2mmx1.6mm SMT LED, 1.1mm THICKNESS. The Super Bright Yellow source color devices are made !LOW POWER CONSUMPTION. with DH InGaAlP on GaAs substrate Light Emitting !WIDE VIEWING ANGLE. Diode. !IDEAL FOR BACKLIGHT AND INDICATOR. !VARIOUS COLORS AND LENS TYPES AVAILABLE. !PACKAGE : 2000PCS / REEL. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.
PAGE 2
Selection Guide Par t No . Dic e KP-3216SYC Iv (m c d ) @ 20 m A L en s Ty p e SUPER BRIGHT YELLOW ( InGaAlP ) WATER CLEAR V i ew i n g An g l e Min . Ty p . 2θ1/2 40 80 120° Note: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. Electrical / Optical Characteristics at T)=25°°C Sy m b o l Par am et er D ev i c e λpeak Peak Wavelength Super Bright Yellow λD Dominate Wavelength ∆λ1/2 Ty p . Max .
PAGE 3
Super Bright Yellow KP-3216SYC SPEC NO: KDA0117 APPROVED:J.Lu REV NO: V.1 CHECKED: DATE: SEP/07/2001 DRAWN: S. H.
PAGE 4
KP-3216SYC SMT Reflow Soldering Instructions Number of reflow process shall be less than 2 times and cooling process to normal temperature is required between first and second soldering process. Recommended Soldering Pattern (Units : mm) Tape Specifications (Units : mm) SPEC NO: KDA0117 APPROVED:J.Lu REV NO: V.1 CHECKED: DATE: SEP/07/2001 DRAWN: S. H.