Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED 590nm 1210 1.3cd 30mA

Page 1 / 4

DESCRIPTIONS

 The Super Bright Yellow device is made with

AlGaInP (on GaAs substrate) light emitting diode chip

 Electrostatic discharge and power surge could

damage the LEDs

 It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

 All devices, equipments and machineries must be

electrically grounded

FEATURES

 3.2 x 2.4 mm SMD LED, 2.4 mm thickness

 Low power consumption

 Ideal for backlight and indicator

 Package: 1500 pcs / reel

 Moisture sensitivity level: 3

 RoHS compliant

APPLICATIONS

 Backlight

 Status indicator

 Home and smart appliances

 Wearable and portable devices



Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

PACKAGE DIMENSIONS

SELECTION GUIDE

KPD-3224SYCK

3.2 x 2.4 mm SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 20mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

KPD-3224SYCK

■ Super Bright Yellow

(AlGaInP)

Water Clear 1000 1300

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.1(0.004") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

3. Luminous intensity value is traceable to CIE127-2007 standards.

Kingbright

Summary of content (4 pages)

PAGE 1
KPD-3224SYCK 3.2 x 2.4 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Super Bright Yellow device is made with AlGaInP (on GaAs substrate) light emitting diode chip Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded FEATURES 3.2 x 2.4 mm SMD LED, 2.
PAGE 2
KPD-3224SYCK ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Emitting Color λpeak Value Unit Typ. Max. Super Bright Yellow 590 - nm λdom [1] Super Bright Yellow 590 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Super Bright Yellow 20 - nm Capacitance C Super Bright Yellow 20 - pF VF [2] Super Bright Yellow 2.0 2.
PAGE 3
KPD-3224SYCK TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Yellow Relative Intensity (a. u.) 100% Ta = 25 °C Ta = 25 °C 80% 0° -15° 15° 30° -30° 45° -45° 60% 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 0.5 0.0 90° 1.0 0.5 SUPER BRIGHT YELLOW Forward current (mA) Ta = 25 °C 40 30 20 10 1.7 1.9 2.1 2.3 Forward voltage (V) 2.5 2.
PAGE 4
KPD-3224SYCK PACKING & LABEL SPECIFICATIONS K g in g i r b t h PRECAUTIONARY NOTES 1. The information included in this document reflects representative usage scenarios and is intended for technical reference only. 2. The part number, type, and specifications mentioned in this document are subject to future change and improvement without notice. Before production usage customer should refer to the latest datasheet for the updated specifications. 3.