Datasheet

ManualsBrandsKingbright ManualsLEDsSMD LED 1206 Green / Red G 574nm, R 645nm

Page 1 / 4

Part Number

Emitting Color

(Material)

Lens Type

Iv (mcd) @ 20mA

[2]

Viewing Angle

[1]

Min. Typ. 2θ1/2

KPTBD-3216SURKCGKC

■

Hyper Red (AlGaInP)

Water Clear

700 1500

*300 *600

■ Green (AlGaInP)

120 250

*120 *250

DESCRIPTIONS

 The Hyper Red source color devices are made with

AlGaInP on GaAs substrate Light Emitting Diode

 The Green source color devices are made with

AlGaInP on GaAs substrate Light Emitting Diode

 Electrostatic discharge and power surge could

damage the LEDs

 It is recommended to use a wrist band or

anti-electrostatic glove when handling the LEDs

 All devices, equipments and machineries must be

electrically grounded

FEATURES

 3.2 mm x 1.6 mm SMD LED, 1.8 mm thickness

 Low power consumption

 Ideal for backlight and indicator

 Package: 2000 pcs / reel

 Moisture sensitivity level: 3

 RoHS compliant

APPLICATIONS

 Backlight

 Status indicator

 Home and smart appliances

 Wearable and portable devices



Healthcare applications

ATTENTION

Observe precautions for handling

electrostatic discharge sensitive devices

PACKAGE DIMENSIONS

SELECTION GUIDE

Notes:

1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value.

2. Luminous intensity / luminous flux: +/-15%.

* Luminous intensity value is traceable to CIE127-2007 standards.

KPTBD-3216SURKCGKC

3.2 x 1.6 mm SMD Chip LED Lamp

RECOMMENDED SOLDERING PATTERN

(units : mm; tolerance : ± 0.1)

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.2(0.008") unless otherwise noted.

3. The specifications, characteristics and technical data described in the datasheet are subject to

change without prior notice.

4. The device has a single mounting surface. The device must be mounted according to the specifications.

Green

Kingbright

Summary of content (4 pages)

PAGE 1
KPTBD-3216SURKCGKC 3.2 x 1.6 mm SMD Chip LED Lamp DESCRIPTIONS PACKAGE DIMENSIONS The Hyper Red source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode The Green source color devices are made with AlGaInP on GaAs substrate Light Emitting Diode Electrostatic discharge and power surge could damage the LEDs It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs All devices, equipments and machineries must be electrically grounded Green FEATURES 3.
PAGE 2
KPTBD-3216SURKCGKC ELECTRICAL / OPTICAL CHARACTERISTICS at TA=25°C Parameter Symbol Value Emitting Color Unit Typ. Max. λpeak Hyper Red Green 645 574 - nm λdom [1] Hyper Red Green 630 570 - nm Spectral Bandwidth at 50% Φ REL MAX IF = 20mA Δλ Hyper Red Green 28 20 - nm Capacitance C Hyper Red Green 35 15 - pF Forward Voltage IF = 20mA VF [2] Hyper Red Green 1.95 2.1 2.5 2.
PAGE 3
KPTBD-3216SURKCGKC TECHNICAL DATA SPATIAL DISTRIBUTION RELATIVE INTENSITY vs. WAVELENGTH Green 80% -30° 15° 30° -45° 60% 45° 60° -60° 40% 20% 75° -75° 0% 350 400 450 500 550 600 Wavelength (nm) 650 700 750 800 -90° 1.0 HYPER RED Luminous Intensity vs. Forward Current Luminous intensity normalised at 20 mA 50 Ta = 25 °C 40 30 20 10 0 1.5 1.7 1.9 2.1 2.3 Forward voltage (V) 2.5 2.5 Ta = 25 °C 2.0 1.5 1.0 0.5 K 0.0 0 g in 10 20 30 40 Forward current (mA) g i r b 0.0 0.
PAGE 4
KPTBD-3216SURKCGKC TECHNICAL DATA TAPE SPECIFICATIONS (units : mm) REFLOW SOLDERING PROFILE for LEAD-FREE SMD PROCESS REEL DIMENSION (units : mm) t h g i r b Notes: 1. Don't cause stress to the LEDs while it is exposed to high temperature. 2. The maximum number of reflow soldering passes is 2 times. 3. Reflow soldering is recommended. Other soldering methods are not recommended as they might cause damage to the product. g in PACKING & LABEL SPECIFICATIONS K PRECAUTIONARY NOTES 1.