Datasheet

SPEC NO: DSAJ8801 REV NO: V.4B DATE: DEC/18/2011 PAGE: 1 OF 6

APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.Su ERP: 1101029229

T-1 (3mm) SOLID STATE LAMP

ATTENTION

OBSERVE PRECAUTIONS

FOR HANDLING

ELECTROSTATIC

DISCHARGE

SENSITIVE

DEVICES

Part Number: L-7104ZGC-G Green

Features

z Low power consumption.

z Popular T-1 diameter package.

z General purpose leads.

z Reliable and rugged.

z Long life - solid state reliability.

z Available on tape and reel.

z RoHS compliant.

Description

The Green source color devices are made with InGaN Light

Emitting Diode.

Static electricity and surge damage the LEDS.

It is recommended to use a wrist band or anti-electrostatic

glove when handling the LEDs.

All devices, equipment and machinery must be electrically

grounded.

Package Dimensions

Notes:

1. All dimensions are in millimeters (inches).

2. Tolerance is ±0.25(0.01") unless otherwise noted.

3. Lead spacing is measured where the leads emerge from the package.

4. The specifications, characteristics and technical data described in the datasheet are subject to change without prior

notice.

PAGE 1
T-1 (3mm) SOLID STATE LAMP Part Number: L-7104ZGC-G Green ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z Low power consumption. The Green source color devices are made with InGaN Light z Popular T-1 diameter package. Emitting Diode. z General purpose leads. Static electricity and surge damage the LEDS. z Reliable and rugged. It is recommended to use a wrist band or anti-electrostatic z Long life - solid state reliability.
PAGE 2
Selection Guide Part No. Dice L-7104ZGC-G Green (InGaN) Water Clear Viewing Angle [1] Iv (mcd) [2] @ 20mA Lens Type Min. Typ. 2θ1/2 8000 14000 34° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 of the optical peak value. 2. Luminous intensity/ luminous Flux: +/-15%. 3. Luminous intensity value is traceable to the CIE127-2007 compliant national standards. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device Typ.
PAGE 3
Green L-7104ZGC-G SPEC NO: DSAJ8801 REV NO: V.4B DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.
PAGE 4
PACKING & LABEL SPECIFICATIONS L-7104ZGC-G SPEC NO: DSAJ8801 REV NO: V.4B DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.
PAGE 5
SPEC NO: DSAJ8801 REV NO: V.4B DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.
PAGE 6
SPEC NO: DSAJ8801 REV NO: V.4B DATE: DEC/18/2011 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: D.M.