Instructions / Assembly

Intended solely for family and domestic use, not for
a commercial playground or daycare. Maximum
weight capacity: 1000lbs.
Oxford Cloth
Instruction Manual
- Recommended for children 3+
years
- Do not leave child unattended
while in use- CAUTION: Use only
under adult supervision
- Good safety practices should
be followed at all times- Read
all instruction before using all instruction before using
this product.
WARNING!
CHOKING HAZARD-SMALL PARTS,NOT
FOR CHILDREN UNDER 3 YEARS.
WARNING!
MAXIUM WEIGHT SHOULD NOT
EXCEED 1000Ibs.
WARNING! WARNING!
DO NOT USE WITHOUT ADULT
SUPERBISION!
WARNING!
ADULT ASSEMBLING REUIRED!
ASSEMBLING
THE SWING
2. Place the blue Oxford cloth on the
ground and unfold it as shown in the
picture.
3. Insert the short foam tube into the
opening on the short side of the Oxford
cloth.
4. Insert the foam tube into the opening
of the oxford cloth and arrange it evenly,
as shown in the picture.
1. Make sure all the components
including the wrench are ready for use.
- 01 -
- 03 -
- 02 -
- 04 -
5. Place 2 straight foam tubes on top
of the Oxford cloth.
6. Repeat steps 3-4 to put all 4 foam
steel pipes in Oxford cloth, as shown
in the figure.
7. Connect one end of the two foam
tubes, corresponding to the positions
of the two holes.
8. Place a washer on the eye bolt
andscrew a nut onto the eye bolt.
9. Take out the wrench, align the
position and tighten the nut.
10. Repeat steps 7-9 to have the
4eye bolts and nuts all assembled to
thesteel frames.
Ensuring Safety of the Swing
Disposing of the Swing