Installation & Assembly

When KinglySlate is used with the recommended adhesive, it can be applied on: OSB, MDF, cement board,

polystyrene board, drywall, composite boards, wood, metal, glass, ceramic tile, polycarbonate, steel frame, EIFS,

stucco, aluminum, concrete, masonry, wood, stone, glass, vinyl, fiber cement siding, metals, PVC, Kynar 500 and

many other substrates. KinglySlate is not recommended for flooring applications due to the thickness of the stone.

PAGE 1
When KinglySlate is used with the recommended adhesive, it can be applied on: OSB, MDF, cement board, polystyrene board, drywall, composite boards, wood, metal, glass, ceramic tile, polycarbonate, steel frame, EIFS, stucco, aluminum, concrete, masonry, wood, stone, glass, vinyl, fiber cement siding, metals, PVC, Kynar 500 and many other substrates. KinglySlate is not recommended for flooring applications due to the thickness of the stone.
PAGE 2
PREPARATION Before the application, clean, brush and/or degrease all surfaces of dust or oils. LAYOUT & PATTERNS The preparation of the area to be covered and the layout of the KinglySlate sheets is the same as of conventional stone veneers or tiles. Time spent preparing the work area will pay off in a job well done. A preliminary dry fit template of the KinglySlate sheets allows pattern and orientation of individual sheets, textures, veins and colors before final placement.
PAGE 3
KINGLYSLATE CAN BE EITHER BUTT JOINTED OR GROUTED: GROUTING: for best results, a test board is recommended to determine what size grout joint works best in your project (an 1/8” to 1/4” grout joint will produce best results. With grout joints this thin, premixed acrylic or sanded grout works best). Premixed grouts are available in several standard colors and easy to clean up with water. To make a grouting joint, space should be left between the sheets (if necessary, tile spacers can be used).