User Manual

Document No. 480ADT2000.A00
DT2000
Page 12 of 17
13. How to configure the DT2000 with Windows OS
If hacking detection has been triggered by entering the incorrect PIN 10 times in succession,
or the drive has been reset, all data on the drive will be lost forever.
Once a new User PIN has been created, the DT2000 will need to be initialised and formatted.
To initialise your DT2000, do the following:
1. Create a new User PIN (see section 4).
2. Unlock the DT2000 by entering the new User PIN and connect it to a computer’s USB
port.
3. The computer should display the following message:
4. Proceed by clicking on Format disk.
Select FAT32 or NTFS depending on your needs, enter a Volume Label and click Start.