User Manual

Document No. 480ADT2000.A00
DT2000
Page 13 of 17
5. Click OK to continue with formatting the drive.
6. The computer will finish formatting the drive and confirm that formatting has been
completed. While the DT2000 is formatting, the Blue LED will flash.
Once finished, the Blue LED becomes solid and your DT2000 is ready for use.
If the formatting wizard does not appear, follow the procedure below:
1. Right-click My Computer or Computer and then click Manage.
2. In the Computer Management window under the Disk Management tab, the DT2000 is
recognised as a removable device in raw format.
Warning: This procedure will erase all data stored on the drive.