User Manual

Document No. 480ADT2000.A00
DT2000
Page 15 of 17
6. The computer will finish formatting and return to the Disk Management window.
While the DT2000 is formatting, the Blue LED will start flashing.
Once finished, the Blue LED becomes solid and your DT2000 is ready for use.
14. How to configure the DT2000 with Mac OS
If hacking detection has been triggered by entering the incorrect PIN 10 times in succession, or
the drive has been reset, all data on the drive will be lost forever.
Once a new User PIN has been created, the DT2000 will need to be initialised and formatted.
To format your DT2000 on Mac OS computers, do the following:
1. Create a new User PIN (see section 4).
2. Unlock the DT2000 by entering the new User PIN and connect to a Mac computer’s
USB port. The system will prompt you with an INITIALIZE window.