Instructions / Assembly

1
2
3
4
←
←
Put the clip in the center of a blade.
Turn on the fan and, if the rolling
persists, put the clip in another blade
until the roll is reduced. It will be the
blade that will need the counterweight.
Place the clip on the blade that needs the
counterweight and try the best place to
place it, from the center to the tip of the
blade, until the wobble disappears.
Glue the counterweight to the height of the
clip on the surface of the blade. Remove the
clip and test the fan. If you keep staggering,
put another counterweight. If it gets worse,
try another better area to place it.
Fans Balance
11