Manual

2 SPECIFICATIONS OF THE SOLYS 2
SOLYS 2
Comments
Performance
Pointing accuracy
< 0.1 º
Meets BSRN requires requirements
Torque
20 Nm
Payload
20 kg
Balanced
Angular velocity
5 º/s
Angular acceleration
3.6 º/s²
Rotation
110 º zenith
540 º azimuth
Protection against over
rotation and damage
Physical limit stops
Operating Conditions and Dimensions
Supply voltage
18 to 30 VDC
(nominal 24 DC)
Allows for battery charging or under load
90 to 264 VAC,
50 / 60 Hz
For world-wide use
Power consumption
during Sun Cycle
20 W maximum
DC Power
120 W maximum
AC Power with heater operating
Power consumption after
Sun Cycle
13 W maximum
DC Power
113 W maximum
AC Power with heater operating
Storage temperature
- 40 to + 50 ºC
Operating temperature
range
- 20 to + 50 ºC
DC Power
- 40 to + 50 ºC
AC Power (heater standard)
Weight
23 kg
For standard tracker
5 kg
Tripod stand
Dimensions (WxDxH)
50 x 34 x 38 cm
(excluding tripod stand)
Includes standard pyrheliometer mounting
Bubble level accuracy
< 0.1°
Relative to zenith shaft
Compliance to international standards
Environmental protection
IP 65
Suitable for all-weather outdoor use
CE compliance
Yes
Materials
Suitable for coastal use and areas with pollution
Features
Transmission
Inverted tooth belts
Pre-tensioned, no adjustment needed
Connections
Plug and socket for
AC power, DC power,
Ethernet
GPS for location and time
/ date information
Standard
Antenna on top of housing
Pyrheliometer mounting
One side plate and
mounting kit as standard
For Kipp & Zonen CH 1 or CHP 1
Mounting base
Standard tripod
Includes adjustable feet for leveling
LED Indicators for
Power, internal
temperature and status
Multi-color to indicate various modes
Customer operation
Installation
Plug-and-play, no PC
GPS acquires location and time / date