Solar Charge Controller Owner’s Manual SC 1210 SC 1210LD SC 1220LD
For safe and optimum performance, the Solar Charge Controller must be used properly. Carefully read and follow all instructions and guidelines in this manual and give special attention to the CAUTION and WARNING statements. Disclaimer While every precaution has been taken to ensure the accuracy of the contents of this guide, KISAE Technology assumes no responsibility for errors or omissions. Note as well that specifications and product functionality may change without notice.
1. INTRODUCTION Thank you for purchasing the KISAE Solar Charge Controller. With our state of the art, easy to use design, this product will offer you a reliable service to convert your PV solar energy to charge you battery in an effective and efficient way. It also protects your battery from overcharge by the PV or over discharge (LD model only) through the DC load connected. 2. PRODUCT DESCRIPTION The KISAE Solar Charge Controller package includes the items list below.
damage the unit. Protect the unit from direct sunlight. Unit should be properly grounded. Grounding should comply with local codes. Do not connect and disconnect the unit when the circuit is live. 4. Understanding the unit See Note: 1 2 To PV Panel 3 4 To Battery 5 6 7 To DC Load The first pair of screw terminals is the input terminal for solar panel connection. The second pair of screw terminals is the bi-directional terminal used for battery connection.
Step 2: Connecting a 12V battery Connect ‘-‘ terminal of Energy Storage (pin 4) on unit to 12V battery negative terminal Connect ‘+’ terminal of Energy Storage (pin 3) on unit to 12 V battery positive terminal Step 3: Connecting a PV panel Connect ‘-‘ terminal of Solar Input (pin 2) on unit to PV panel negative terminal Connect ‘+’ terminal of Solar Input (pin 1) on unit to PV panel positive terminal Step 4: Connecting a DC load Connect ‘-‘ terminal of Load Output (pin 6) on unit to PV panel negat
Check connection polarity. Reverse polarity on any terminals will damage unit and is not covered by warranty. Verify the DC load consumption. The power consumed by the DC load should be less than the PV panel generates. 8. Specifications SC 1210 SC1210LD Battery Voltage: 12 VDC PV open circuit voltage (max): 26 VDC Charge current (max): 10 A 10 A Load current (max): 10 A 10 A Surge Current (max) 35A for 1 min 35A for 1 min Operational current: < 10 mA <10 mA Regulated battery voltage Sealed type: 14.
9. Warranty One Year Limited Warranty The limited warranty program is the only one that applies to this unit, and it sets forth all the responsibilities of KISAE. There is no other warranty, other than those described herein. Any implied warranty of merchantability of fitness for a particular purpose on this unit is limited in duration to the duration of this warranty.
