SDS

Inhalation : If breathing is difficult, provide fresh air and contact physician.
Eye Contact : Fume or dust from this product should be flushed from the eyes with copious amounts
of clean, tepid water until victim is transported to an emergency medical facility. Do not allow
victim to rub or keep eyes tightly closed. Obtain medical assistance at once. Arc rays can injure
eyes. If exposed to arc rays, move victim to dark room, remove contact lenses as necessary for
treatment, cover eyes with a padded dressing and rest. Obtain medical assistance if symptoms
persist.
Skin Contact : Remove contaminated clothing and wash the skin with cool water promptly with mild
soap. If the skin has thermal burns, obtain medical assistance at once.
Ingestion : If breathing is difficult, provide fresh air and avoid eating & drinking. If some symptoms are
founded, Obtain medical assistance at once.
See toxicological information on various ingredients
in Section 11 of this Safety Data Sheet. See how to protect yourself and your co-workers in
Section 8 of this SDS.
The welding consumables mentioned in this SDS are nonflammable, nonexplosive, nonreactive and
are non-hazardous till they are welded. The welding arc is an intense source of energy that can ignite
flammable and combustible products. The sparks and spatters can do the same. Even after use, the
welding consumables can remain hot for quite some time. The associated tools and fixtures also can
remain hot after completion of the welding process. Refer to American National Standard Z49.1 for
further safety and handling information.
And refer to the Canadian Standard “ Safety in Welding and Cutting, and Allied Processes” CAN /CSA-
W117.2-M87 for fire prevention and protection information during the use of welding and allied
procedures.
Section 4. - First-Aid Measures
Section 5. - Fire-Fighting Measures
Section 6. - Accidental Release Measures
Zirconium 7440-67-7 <0.5
Iron 7439-89-6 Balance
Silicon 7440-21-3 <1.5
Copper 7440-50-8 <0.5
Titanium 7440-32-6 <0.5
Molybdenum 7439-98-7 <0.75
Aluminum 7429-90-5 <0.5
Manganese 7439-96-5 <2.5
Section 3. - Composition/Information on Ingredients
Chemicla Identity CAS Number Content (%)
Carbon 1333-86-4 <0.5