Operation Manual

ManualsBrandsKitchenaid ManualsDomestic5KES100 Artisan

English

Preparing the Espresso Machine for Use

Attach the Cup Rail

Align the three rail posts with the holes on top of the

espresso machine. Then press the rail posts firmly into

the holes.

Remove and Wash the Water Tank

1. Lift the tank slightly, then remove by pulling the bottom

of the tank from the espresso machine.

2. Wash the tank in hot, soapy water and rinse with clean

water. The tank can also be washed in the top rack of

the dishwasher.

3. Place the tank back into the espresso machine, making

sure the siphon hoses are placed inside the tank. The

ribs on the bottom of the tank fit into the grooves on

the base of the housing.

Fill and Rinse the Boilers

The boilers need to be filled and rinsed before the espresso

machine is used for the first time. The boilers will also need

to be filled when:

• the espresso machine is not used for a prolonged period

• the water tank runs dry during use (this can damage the

espresso machine)

• multiple beverages are steamed without brewing

espresso or dispensing hot water

1. Slide the water tank left or right to expose the top, and

fill with fresh cold water to the max fill line.

NOTE: Distilled water or mineral water can damage the

espresso machine. Do not use either to brew espresso.

2. Insert the end of the electrical cord without prongs into

the cord receptacle in the back of the espresso machine.

3. Plug the other end of the cord into a grounded outlet.

4. Make certain the “ ” Dial is closed by rotating it

clockwise as far as possible.

5. Press the “ ” Button to turn the espresso machine on.

When the espresso machine is on, the power-on (I)

indicator will illuminate, the dual boilers will begin

heating, and the “ ” and “ ” Buttons will operate.

6. Place a coffee cup underneath the brew head. Do not

attach the filter holder to the brew head.

WARNING

Electrical Shock Hazard

Plug into a grounded outlet.

Do not remove ground prong.

Do not use an adapter.

Do not use an extension cord.

Failure to follow these instructions can result in

death, fire or electrical shock.