Installation Instructions

13
Backer Panels
NOTES:
■ Dashed lines represent placement of backer panels on overlay
panels.
■ Illustration shows backer panels placed on decorative
overlays.
Model D E F
36 14¹/4"
(36.20 cm)
19¹/4"
(48.90 cm)
33³/4"
(85.73 cm)
42 16³/4"
(42.55 cm)
22³/4"
(57.79 cm)
39³/4"
(100.97 cm)
48 19¹/4"
(48.90 cm)
26¹/4"
(66.68 cm)
45³/4"
(116.21 cm)
Overlay Series Door Handle Kits
The following handle style is available. Contact your KitchenAid
dealer or KitchenAid Parts and Accessories at 1-800-442-9991. In
Canada, call 1-800-807-6777.
Custom Side Panels
Custom side panels may be needed when not enough space is
available to have cabinets on both sides of the refrigerator or when
the refrigerator is placed at the end of a cabinet run. You may
choose an Inset, Flush, or Recessed Inset panel installation.
Refrigerator and Side Trim Dimensions
The width and height of a side panel are determined by the type of
installation you are planning.
NOTES:
■ The dimensions shown are actual product dimensions and
may not reect the needed panel installation dimensions.
■ The side panel should be a minimum of 1/2" (1.27 cm)
thick to avoid warping.
■ If the opening depth is 25" (63.5 cm) or more, you may
want to install a support board on rear wall.
Side Trim
BA
C
Knurl grip handle with chrome endcaps - W10782873
6
3
⁄16"
(15.7 cm)
70
1
⁄2"
(179.1 cm)
70
1
⁄2"
(179.1 cm)
Bottom Offset
1/2" (1.27 cm)
Bottom Offset
1/8" (3.2 mm)
Handle
Side Offset
1/4"
(6.4 cm)
Top Offset
1
5
⁄8" (4.13 cm)
Side Offset
1/2" (1.27 cm)
23
19
⁄32"
(59.9 cm)
23
19
⁄32"
(59.9 cm)
23
17
⁄32"
(59.8 cm)
23
17
⁄32"
(59.8 cm)
23
15
⁄32"
(59.6 cm)
23
15
⁄32"
(59.6 cm)
5/8"
(15.7 cm)
9/16"
(13.9 mm)
1/2"
(12.2 mm)
11/16"
(18.0 mm)