Dimensions Guide

FRONT VIEW
DOOR SWING DIMENSIONS
Width dimensions were measured from trim edge to trim edge.
Height dimensions are shown with leveling legs extended
¹⁄₈" (3 mm) below the rollers.
Model Width A (Trim edge to trim edge)
36
36
11
⁄32" (92.3 cm)
42
42
11
⁄32" (107.5 cm)
48
48
11
⁄32" (122.8 cm)
*When leveling legs are fully extended to 1¹⁄₄" (3.2 cm) below rollers,
add 1¹⁄₈" (2.9 cm) to the height dimensions.
The location must permit both doors to open to a minimum of 90°. Allow 5"
(12.7 cm) minimum space between the side of the refrigerator and a corner wall.
NOTE: More clearance may be required if you are using overlay panels, custom
handles, or extended handles on a Classic model.
To adjust the door swings, see “Adjust Doors.”
36" (91.4 cm) Models
42" (106.7 cm) Models
48" (121.9 cm) Models
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
Ref. W10763010B
3/16
Page 2 of 2
TOP VIEW
Model Width A
36 35" (88.9 cm)
42 41" (104.1 cm)
48 47" (119.4 cm )