Dimensions Guide
1-1/8”
G1
E1
F
E1
F
C
D
G1
7/8”
G2
E2
F
E2
F
C
D
G2
E2
F
N
D
or
or
A
B
C
D
E
F
KCDB250G KCDS100T
KCDI075V KBDS100T
KCDS075T
Because Whirlpool Corporation policy includes a continuous commitment to improve
our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation
Instructions packed with product. Specifications subject to change without notice.
W10118055 Rev. A
02-20-09
PRODUCT MODEL NUMBER
Electrical: This disposer is intended to be direct-wired to the electrical supply. If junction box is used, connect the junction box to the switch
on a separate 15- or 20-amp 115 Volt circuit with the appropriate cable. (Use 14 gauge wire with 15-amp circuit, and 12 gauge wire with 20-amp
circuit.) This disposer requires a switch marked "Off" position (wired to disconnect all ungrounded supply conductors) installed within sight of the
disposer sink opening. (1 hp minimum rating.)
Installations on thicker sinks (such as solid surface, porcelain, or cast iron) may require the use of alternate parts.
See instructions below for installation with various thicknessess:
FIGURE A: Thin Sink
All Models
(< 3/8")
For thin sinks insert ber gasket (D), backup
ange (E1) and mounting ring (F). Hold in place
while inserting the snap ring.
For thick sinks insert ber gasket (D), backup
ange (E2) and mounting ring (F). Hold in place
while inserting the snap ring.
For extra thick sinks use extended sink ange (N),
to order in US call 1-800-422-1230, in Canada
call 1-800-6777. Insert ber gasket (D), backup
ange (E2) and mounting ring (F). Hold in place
while inserting the snap ring.
OVERALL DIMENSIONS
A
B
C
D
E
F
KCDB250G
KCDI075V
KCDS075T
KCDS100T
KBDS100T
6
5
/
16
"
(16.0 cm)
11
3
/
8
"
(28.9 cm)
5
3
/
4
"
(14.6 cm)
4"
(10.2 cm)
6"
(15.2 cm)
8
1
/
2
"
(21.6 cm)
12
3
/
4
"
(30.5 cm)
5
3
/
4
"
(14.6 cm)
4"
(10.2 cm)
6
11
/
16
"
(17 cm)
9"
(22.9 cm)
12
3
/
4
"
(30.5 cm)
5
3
/
4
"
(14.6 cm)
4"
(10.2 cm)
6
11
/
16
"
(17 cm)
9"
(22.9 cm)
12
3
/
4
"
(30.5 cm)
5
3
/
4
"
(14.6 cm)
4"
(10.2 cm)
6
11
/
16
"
(17 cm)
9"
(22.9 cm)
12
3
/
4
"
(30.5 cm)
5
3
/
4
"
(14.6 cm)
4"
(10.2 cm)
6
11
/
16
"
(17 cm)
Dishwasher Drain Connection
Food Waste Disposer
FIGURE B: Thick Sink
All Models
(> 3/8")
FIGURE C: Extra Thick Sink
For Model KBDS100T Only
(> 3/4")
C = Standard Sink Flange
G1 = 1 1/2" screws
G2 = 1 1/8" screws