Installation guide

ManualsBrandsKitchenAid ManualsMicrowaveOfficial KitchenAid countertop microwave

MICROWAVEOVEN BUILT-INTRIMKIT

INSTALLATIONINSTRUCTIONS

Built-In Trim Kit Models MK1150XP, MK1154XP, MK1157XP

UL listed for use over built-in electric ovens:

24" (60.96 cm): RBS245PD, KEBI141 D, KEBS147D

27" (68.6 cm): (Y)RBS275PD, (Y)GBS277PD, KEBI171 D, (Y)KEBS177D

30" (76.2 cm): (Y)RBS305PD, GBS307PD, (Y)KEBI101 D, (Y)KEBS107D

INSTRUCTIONSD'INSTALLATION

GARNITUREENCASTRIr:EPOURFOUR

.Z.MICRO-ONDES

Garniture pour modules MK1150XP, MK1154XP, MK1157XP

Homologations UL pour utilisation

au-dessus des fours encastr6s 61ectriques :

24" (60,96 cm): RBS245PD, KEBI141 D, KEBS147D

27" (68,6 cm): (Y)RBS275PD, (Y)GBS277PD, KEBI171 D, (Y)KEBS177D

30" (76,2 cm) : (Y)RBS305PD, GBS307PD, (Y)KEBI101 D, (Y)KEBS107D

Tableof Contents / Tabledes mati@res

MICROWAVE OVEN SAFETY ................................................ 2

INSTALLATION INSTRUCTIONS .......................................... 2

Tools Recommended ........................................................... 2

Parts Supplied ...................................................................... 2

Cutout Dimensions .............................................................. 2

Electrical Requirements ....................................................... 3

Microwave Oven Preparation .............................................. 3

Bottom Duct Assembly ........................................................ 3

Side Duct and Upper Duct Assembly .................................. 3

Anti-Tip Bracket Installation ................................................. 4

Microwave Oven Placement ................................................ 4

Trim Kit Frame Installation ................................................... 5

SECURIT¢: DU FOUR .&.MICRO-ONDES ................................. 5

INSTRUCTIONS D'INSTALLATION .......................................... 6

Outillage recommande ............................................................ 6

Pieces fournies ........................................................................ 6

Dimensions pour le decoupage .............................................. 6

Specifications electriques ....................................................... 6

Preparation du four & micro-ondes ......................................... 7

Assemblage du conduit du bas .............................................. 7

Assemblage du conduit lateral et du conduit superieur ......... 7

Installation de la bride antibasculement ................................. 8

Mise en place du four a micro-ondes ..................................... 8

Installation du cadre de garniture ............................................ 8

IMPORTANT: Save Installation Instructions for local electrical inspector's use.

IMPORTANT : Conserver ces instructions d'installation a I'usage de I'inspecteur local des installations electriques.

8205554/3828W5U 0442

Summary of content (8 pages)

PAGE 1
MICROWAVEOVEN BUILT-INTRIM KIT INSTALLATION INSTRUCTIONS Built-In Trim Kit Models MK1150XP, MK1154XP, MK1157XP UL listed for use over built-in electric ovens: 24" (60.96 cm): RBS245PD, KEBI141 D, KEBS147D 27" (68.6 cm): (Y)RBS275PD, (Y)GBS277PD, KEBI171 D, (Y)KEBS177D 30" (76.2 cm): (Y)RBS305PD, GBS307PD, (Y)KEBI101 D, (Y)KEBS107D INSTRUCTIONS D'INSTALLATION GARNITUREENCASTRIr:E POURFOUR .Z.
PAGE 2
MICROWAVE OVEN SAFETY safety and the safety of others Your are very important. We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety messages. This symbol alerts you to potential hazards that can kill or hurt you and others. All follow the safety alert symbol and either the word "DANGER" or Thissafety is themessages safety alertwillsymbol. "WARNING.
PAGE 3
_iii}}![ieogixiklx:::::_ili !ii%eq@i"epiii%@,i!Kii$ 1. Fasten bottom bracket to bottom duct using two 1/2"screws. (Rear view of bottom duct) jB Electrical Plug into a grounded ........................................ A. Bottom bracket B. ½" screws Shock Hazard 3 prong outlet. Do not remove ground prong. Do not use an adapter. Do not use an extension 2. Remove 2 existing screws from right side of microwave oven, and 1 existing screw from left side. 3.
PAGE 4
2, Peel off backing of double-sided tape. Align the duct assembly screw hole to the existing screw hole on left side of microwave oven, and attach the duct assembly to the oven. Press down firmly on ducts, then fasten with existing screw. : .... © 1. Slide microwave oven partway into cutout opening. NOTE: Bottom bracket must be flat against cutout floor in order to correctly engage with anti-tip bracket. A. Existing screw On cutout floor, use template to mark hole centers for anti-tip bracket.
PAGE 5
1. A Place trim kit frame over microwave oven. NOTE: Trim kit frame must be oriented so that the louvers are sloping downward in the front. \.jF-\ 2. Make sure the trim kit frame is level and equally centered on all 4 sides with respect to microwave oven. Mark 4 hole centers through the 4 mounting holes of trim kit frame. 3. Remove trim kit frame and drill 4 pilot holes. (Use %4" drill.) 4. Attach trim kit frame using four 1" screws. Make sure orientation is correct as stated in Step 2. \-_.
PAGE 6
INSTRUCTIONSD'INSTALLATION DIMENSIONS AU-DESSUS DU FOUR ENCASTRE 24" (61,0 CM) AU-DESSUS DU FOUR ENCASTRI_ 27" (68,6 CM) AU-DESSUS DU FOUR ENCASTRI_ 30" (76,2 CM) Largeur 221/2'' (57,15 cm) 251/2'' (64,77 cm) 251/2'' (64,77 cm) min; 281/2'' (72,39 cm) max. Profondeur min. 181/2'' (46,99 cm) avec prise de courant en affleurement; min.
PAGE 7
3= INSTRUCTIONS DE MISE A LA TERRE (Vue avant du four a micro-ondes) • Pour tout appareil menager connecte par un cordon de courant electrique : II faut que le four & micro-ondes soit relie & la terre. En cas de court-circuit electrique, la liaison & la terre reduit le risque de choc electrique car le courant electrique dispose d'un itineraire direct d'acheminement & la terre.
PAGE 8
i_i:_l_i©_ _::::t@ !_ ©!'id@ G_ib_ '_ •ul@_Y_@_' Sur le plancher de la cavite, utiliser le gabarit pour marquer la position du centre des trous de fixation de la bride antibasculement. Veiller a aligner I'axe central du gabarit avec I'axe central du plancher de la cavit& (L 'illustration n'est pas DI'_chelle.) A B C D A. ! _" (3,8! cm) B. 3" (7, 62 cm) C. 16" (40,64 cm) 2. Brancher le four a micro-ondes, 3.