Use and Care Manual

12
■ Do not leave the grill unattended while cooking.
■ To avoid damage to the grill, do not use aluminum foil,
charcoal or wood chips.
■ To avoid damage to cookware, do not place cookware on the
grill when in use. Food should be cooked directly on the grill
grate.
Before removing or replacing grill, make sure the control knobs
are turned to OFF. Allow the grill to cool completely before
handling.
To Remove:
1. Remove grill grate and wave tray.
2. Pull forward slightly on the flame spreader to release the tabs
from the rear slots and lift out.
3. Lift up and out to remove the burner assembly.
Remove Grease Trays:
1. To remove the small grease tray, unhook tabs from slots and
lift slightly to disengage it from the large grease tray.
2. Unhook tabs from slots and lift out the large grease tray.
3. Remove the drip tray.
4. Clean basin. See “General Cleaning” section.
To Replace:
1. Slide drip tray into opening on the right front side of the grill
basin. There are guides to assure correct placement of the
drip tray.
2. Insert the large grease tray all the way under the back edge of
the grill basin and hook it into the slots.
3. Insert the small grease tray all the way under the front of the
grill basin and hook it into the slots.
When the 2 grease trays are installed properly, the small
grease tray will hook over the large grease tray.
A. Grill front
B. Rear tabs and slots
A. Large grease tray
B. Grease tray connection
C.Small grease tray
D. Slots
A. Large grease tray
B. Slots
A
B
A
B
C
D
A
B
A. Drip tray
A. Drip tray
A. Large grease tray
B. Slots
A. Large grease tray
B. Grease tray connection
C. Small grease tray
D. Slots
A
A
A
B
A
B
C
D