Instructions / Assembly

2. Determine and mark centerline of the cutout space. The

mounting bracket must be installed on the right side of the

cutout. Position mounting bracket in cutout as shown in the

following illustration.

Measurement B:

30" (76.2 cm) ranges: 11⁵⁄₈" (29.5 cm)

36" (91.4 cm) ranges: 14⁵⁄₈" (37.1 cm)

48" (121.9 cm) ranges: 20⁵⁄₈" (52.4 cm)

Measurement C:

Optional distance from back wall. If back wall is constructed

of a combustible material and a backguard is not installed, a

6" (15.2 cm) minimum clearance is required for all models.

Install anti-tip bracket accordingly.

3. Drill two ¹⁄₈" (3.0 mm) holes that correspond to the bracket

holes of the determined mounting method. See the following

illustrations.

Floor Mounting

Wall Mounting

4. Using a Phillips screwdriver, mount anti-tip bracket to the wall

or floor with the two #12 x 1⁵⁄₈" screws provided.

Depending on the thickness of your flooring, longer screws

may be necessary to anchor the bracket to the subfloor.

Longer screws are available from your local hardware store.

5. Move range close enough to opening to allow for electrical

connections to be made. Remove shipping base, cardboard

or hardboard from under range.

6. Continue installing your range using the following installation

instructions.

A. Centerline

B. Centerline of cutout to centerline of anti-tip bracket

C. Back wall to back of range

A. #12 x 1⁵⁄₈" screws

B. Anti-tip bracket

A. #12 x 1⁵⁄₈" screws

B. Anti-tip bracket